Meanwhile back at the ranch have been working on the exterior woodwork. It was in pretty rough shape. I removed and disassembled it all then I ran whatever I could through a planer. I had to rebuild the main hatch, the winch pads, and the cockpit combing wings. I have 2 sealer layers and 3 build layers on most of the exterior wood now and it is starting to look like it belongs on a boat. I am using Epifanes Gloss varnish thinned 50% for the seal coats and 10% for the build coats. I plan to do a three more build coats then switch to the rubbed effect for the next 4 coats. After it is reassembled and installed on the boat I will probably have to do at least one touch up coat.