+ Reply to Thread
Page 25 of 29 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 LastLast
Results 361 to 375 of 422

Thread: Commander 147

  1. #361
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    Oh Man! I have drawn up about 10 takes on your interior bulkheads. I could never get them right as I had designed them with some depth... rather than your far cleaner and brilliantly simple veneer. They look beautiful and I am stealing your design next winter. Get ready for questions... in a year. Beautiful work Jerry!

    "Mother, Mother Ocean. I have heard your call. Wanted to sail upon your waters since I was three feet tall." Countdown! I can hear your bow plying the Gulf!

  2. #362
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133
    Bisquit wants to be like Destiny when she grows up. You really do beautiful work.
    Phil

  3. #363
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720
    Phil


    Here's hoping Bisquit does not take as long to grow up as Destiny did. I built my own home in half the time it took me to rebuild from the ground up Destiny. But I did not hire any of it out except the sails and soon I will pay someone to do the bottom job. The rest was evenings and weekends when ever I could spare the time or muster this old body to get out there and work. Your louver looked pretty good. And I picked up on the dado's in your table saw out feed table how you drilled holes at the end of the dado to let sawdust drop through. When I saw that I thought ingenious! Unfortunately it would not work for mine because I have a shelf below the top where I store power hand tools.


    Hopefully you will not even need to do a lot of the things I did like getting rid of the compression post and building a new rudder. But I look forward to watching your progress. And thanks again for saving another commander.
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  4. #364
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133
    Thanks for the encouragement. I'm hoping to move Bisquit along quickly but know it will take longer than planned. Twice as long as twice as much - isn't that the rule of thumb? I figure as long as I have unrealistic expectations it shouldn't take too long. I have the advantage of working in a boat yard so I can sneak out in the afternoon and after work and put a few hours in. I already have finished reconditioning almost all of the exterior wood (hatch boards, entry trim, combings, handrails etc...) and will start building varnish between glass projects. I plan to start re-coring this week. I see how you did your deck layout. I'm going to have to map mine out soon as I plan to replace the balsa with G10 where hardware is located. Is there a discussion about deck layout pros and cons on the site? I have lots of questions for you.

  5. #365
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720
    When it comes to deck layout there are lots of bits an pieces here and there but I do not know of a specific thread dedicated to it here. And a lot of how you lay your deck out should in my opinion be geared to how you like things to work when you are sailing your boat. For example Mike who sails Commander 227 prefers his halyards led aft to the cockpit. Me on the other hand I find especially when trying to reef that I am bouncing back and forth between the cockpit and the mast far too much. So I want everything all in one place where I can do a complete job and then head back to the cockpit and go back to sailing. Neither is wrong it is just personnel preference. I have a friend who is older than me and sails an ensign and he sits in one spot in his cockpit whenever he is sailing so everything is led to that spot. Bottom line is there are a lot of things that work but knowing how you like things to be is what really makes your sailing more enjoyable.


    Now that being said, I should tell you I feel like with my deck layout I did one thing less than perfect for my way of sailing. The jib track next to the cabin is not long enough going forward. With our lower shrouds the forward one can interfere with the sheet when running down wind. So if you chose to follow that jib track placement make the track go far enough forward to have a clear path for the sheet when running down wind. I chose to put the track down there because I used up most of the cabin top with my long handrails. I have no life lines and wanted more place to hold onto when going forward.
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  6. #366
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    Quote Originally Posted by Bisquit View Post
    Is there a discussion about deck layout pros and cons on the site? .
    Searching on the subject (jib track, etc) should bring up a number of solutions. Jib track locations depend on the size of the headsail. For deck sweeper jibs, the track is inside the shrouds near the large windows. For a 120, the track would be next to or on the rail from behind the shrouds toward the aft. A 150's track would be further back. You can see these placements on A-100, A-76 and several other SF Bay yachts where the winter winds are zilch and a calm summer day is about 25 kts.

  7. #367
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720

    Making a fulll boat cover

    My wife bless her good heart is only a fair weather sailor but she has still been a huge help in making Destiny what she has become. She made Destiny's new V-berth cushions, her new cockpit cushions, she is making the curtains for the port lights, she made trapazoid cushions to lean back against when sitting below she is making the new sail cover, and today she spent the day making a pattern for the new boat cover to help protect Destiny's bright work from Florida's sun. She used plastic sheeting to create a pattern that she will use to layout and make the sunbrella cover. She was able to see through the plastic to mark all of the areas that would require reinforcements or access to cleats etc.
    Attached Images  
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  8. #368
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720

    Stepping stones to the waters edge.

    So today Destiny went to the marina where they lifted her off the trailer and held her in the air so I could install the rudder. Then they set her down on the ground and blocked her up for the bottom job. Hopefully that will get done sometime this week provided the guy who is doing it can get two days of dry weather in a row.


    There will be 4 coats of barrier coat and then 4 coats of Coppercoat going on her.


    I was very pleased to see how well the new rudder fit when I installed it. There was no way to test fit that along the way because I don't have a travel lift in my back yard. But the way it went together you would almost think it was made just for her! :-)


    Installed the prop and prop shaft and stuffed the stuffing box today so for the first time in a very long time she is water tight again.


    The only casualty today was on the way to the marina one of the brand new turnbuckles jiggled off right in the middle of a very busy intersection. The kind of intersection where you are literally taking your life into your hands if you try to retrieve something there. So I will be buying a new one and a second as a spare.


    The sail maker was here last week and took his final dimension for the working jib. He brought me the new main and genoa. They look great I hope they work as great as they look.


    So next weekend she comes home (hopefully) for all of the last minute things that still need doing and then she is loaded with gear to head to the water. Unfortunately the weekend after next I have to go to a niece's wedding in Wisc. so she will not launch then. And my wife is going to stay up there for an extra week to visit childhood friends so she will probably not get launched the following weekend either because she really wants to be there for the splash. And as much help as she has been I cannot deny her that.


    But we are rally really close now!!!!!!!!!!
    Attached Images    
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  9. #369
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621

    Thumbs up CopperCoat

    Please sir, Give us all you can on the application of this system.
    I've read of some sticking problems.
    So has CopperCoat, but their answers were not convincing.

    A product that promises 10 years in salt water (and indications of many bottoms going twice that)
    is worthy of discussion.
    Tips on getting it on would be great!
    Promises come with the territory.

    Love that hand rail!
    Last edited by ebb; 05-03-2015 at 03:08 PM.

  10. #370
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720
    ebb


    The game plan is to apply the 4 coats of barrier coat as close together as possible (as soon as the previous coat is cured enough to apply another) and then follow up right away with the Coppercoat. We may be able to apply a coat of Coppercoat and by the time we get all the way around the boat the just applied coat will likely be cured enough at our starting point to follow up immediately with the next and so on.


    Where the jack stands are we will paint the barrier coat as close as we can and the Coppercoat will be stepped back at least 6" all the way around. Then once the surface has cured enough to safely relocate the jack stands we will sand the edges of both finishes and do the same process all over again where the jack stands were previously.


    As I understand it there are two critical things you need to do. First constantly mix the Coppercoat. The copper settles out very quickly so you have to mix, mix, mix as you apply.


    Second you cannot allow the Coppercoat to get wet before it is completely cured. And that is very important.


    So that is the pregame lineup we will have to see how the ball game actually goes.
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  11. #371
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621

    Talking Dew diligence

    That's pre-game...thanks.
    Going to have look where your dewpoint is... if you are between coats over night.
    Maybe just draping with Ty-vec or plastic film will keep it off your work!

    No, I wonder if it's little things like that... that cause the mishaps people complain about...
    Epoxy amine blush is another
    ....very high humidity...
    Making sure we're well within the recoat limit, especially in high temps.

    Never thought dust would be a problem with epoxy...
    but maybe if your dust comes off a highway...black and sticky... like where Littlegull is sitting...
    Last edited by ebb; 05-04-2015 at 07:55 AM.

  12. #372
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133
    What are you using for a barrier coat?

  13. #373
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720

    Using this.....

    Interlux barrier coat. I used it before with good results.
    Attached Images  
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  14. #374
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133
    We have had very good results with it as well. We have been using it for many years. Last year we started using it instead of high build primer for Awl Grip paint jobs. We still prime with 545 before the topcoat but the 2000 is a good base. It works for priming masts too.

  15. #375
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720
    Quote Originally Posted by Bisquit View Post
    We have had very good results with it as well. We have been using it for many years. Last year we started using it instead of high build primer for Awl Grip paint jobs. We still prime with 545 before the topcoat but the 2000 is a good base. It works for priming masts too.

    That's interesting.
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts