Results 1 to 15 of 55

Thread: Deck hardware plan, and

Threaded View

  1. #16
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621

    bag of peanuts

    Craig,
    Upscale marina there! Looks like you're tied up to a putting green!
    Like that stealth bimini too!

    Once saw an interesting way to waterproof deck holes.

    You mount a chain pipe* fitting onto a wood pad that has a groove all round its side so a canvas cap can be lashed over the thing. Like a winch cover.

    Another idea for rough weather is to remove the cowl and replace it with an aluminum disk. Don't know if that would work with the ole cowl you have.


    But you are in Florida
    and there must be others here in the bleacher seats who would like to know
    how you reduce damp and mold in the forepeak. Is the old cowl enough?
    Won't rain get in?
    __________________________________________________ __________________________________________________ __________________
    * why is a traditional curved bronze chainpipe fitting not designed with a gasketed screw on cover?
    It's not as if the pipe has to be instantly available at all times for the anchor chain, right?
    The center of the cap could have a loose hook through it - that could take a chain link - so it would be right there for the anchor when the cap is unscrewed.
    As it is, it is instantly available to take water below. The bonnet idea seems doable.
    Last edited by ebb; 04-11-2011 at 02:23 PM.

Similar Threads

  1. Replacing Deck Tread Pattern
    By Theis in forum Technical
    Replies: 10
    Last Post: 02-07-2012, 09:07 PM
  2. All those wires inside my mast gotta go!
    By Scott Galloway in forum Technical
    Replies: 26
    Last Post: 07-04-2007, 07:40 AM
  3. Re-bedding Hardware
    By commanderpete in forum Technical
    Replies: 28
    Last Post: 02-20-2007, 08:24 AM
  4. Replies: 11
    Last Post: 08-18-2005, 05:33 AM
  5. PEARSON HARDWARE
    By Bill in forum General/Off-Topic
    Replies: 10
    Last Post: 01-11-2005, 07:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts