Well there seems to be no end of things that require my time...
But I still have been finding some time for the boat. As the old saying goes where there is a will there is a way.
Ebb I am happy to report that the 1708 biax stuck very well to the bottom side of the deck. I layed 11" wide area on the bottom of the deck and 4" wide on the side of the hull. I cut the pieces into a small manageable size that was only 9" wide. Then I wet out the deck and hull where I was getting ready to put the biax, and then the mat side of the biax. I would stick the biax up with my referance line right on top of the fillet where the deck and hull come together. Then add resin to the exposed woven side of the biax and imediately follow with a layer of 6oz. cloth to minimize the amount of fairing I have to do later.
The first picture is what it looked like after I had the glass in place. It actually went very well.
The next picture is some future planning work I'm doing. Initially I plan to have my halyards terminated at the mast and I will mount a couple of winch pads on the mast for the halyard winches. But as I get older I may decide I want to run them back to the cockpit. So the second picture is of areas that I am making solid glass pads for rope clutches and winch bases.
And since I need to recore the bow area and because I wanted to make a more substantial mounting point for my bow cleat I glassed in the top of the bulhead leading to the chain locker.
JERRY CARPENTER - C147
A man can succeed at almost anything for which he has unlimited enthusiam.