-
Scott, to the best of my knowledge, that is a new oak tiller and newly fabricated tiller head. I took a picture of the head - Sealand model 960. Same as Mike's. See below.
One seacock onboard below the sink. Port and starboard cockpit drains are identical clamped (painted) rubber hoses - see below.
There is an unidentified (by me) drain in the bilge which I assume would accomodate a bilge pump. No pump - except a manual one - onboard so far. That seems like a must-do.
I want to bring a bucket to the yard next visit and with a spotter below, pour some water through the two scuppers and two cockpit drains.
Can anyone identify the fitting in the last two pictures? It is on Stbd a couple feet from the bow. Interior fitting leads to the chromed exterior fitting (sorry it is blurry)
Last edited by Lucky Dawg; 02-08-2008 at 07:48 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules