I recall a couple of months back, someone was thinking about a teak rub rail. I had a similar issue in the original overhaul. When we got the boat , the hull/deck seam was split on the stbd side from a midships to the bow. Somewhere in the previous repair attempts (before we took posession), the original stainless rub rail was removed & lost. I elected to replace the lost rub rail with a line of teak (using the witness marks of the original for dimensions).
Here's a view of the bow:
(p.s. before any professional riggers send hate mail, the clevis pin at the base of the furler has since been turned end-for-end. Just in case the cotter pin breaks/drops out, the clevis will stay)
Last edited by bill@ariel231; 12-04-2005 at 07:45 PM.
Reply With Quote