Results 1 to 15 of 55

Thread: Deck hardware plan, and

Threaded View

  1. #15
    Join Date
    Apr 2004
    Location
    Pensacola, FL
    Posts
    725
    THe good Captain Ebb has returned my Cowl to me after he concluded to he was going another direction.

    I always liked the cowl vent, and never experienced taking significant water below through it.... I removed it since I was heading out for an extended cruise and expected to see big seas... which we did.

    I am no longer fearful of having the 3" hole in the bow, with a scoup.... The bow rarely crashes into the waves, and the receptacle can be plugged with a standard 3" PVC pluming cap.

    When it was mounted before, I had it on the Stbd side and used it to pass the chain down into the locker. It was really nice being able to pass links even when they were laid up on each other.

    SO.... what say the peanut gallery? Should I replace the 1.5" capped chain scuttle and just place this back in same location? Should I leave the cap, and place the cowl on the port side?

    What say the gallery?

    Here is a picture, kinda tough to see... I will look for a better one.

    Name:  CRW_1530-58.jpg
Views: 433
Size:  46.9 KB
    Last edited by c_amos; 09-17-2010 at 09:22 PM.


    s/v 'Faith'

    1964 Ariel #226
    Link to our travels on Sailfar.net

Similar Threads

  1. Replacing Deck Tread Pattern
    By Theis in forum Technical
    Replies: 10
    Last Post: 02-07-2012, 09:07 PM
  2. All those wires inside my mast gotta go!
    By Scott Galloway in forum Technical
    Replies: 26
    Last Post: 07-04-2007, 07:40 AM
  3. Re-bedding Hardware
    By commanderpete in forum Technical
    Replies: 28
    Last Post: 02-20-2007, 08:24 AM
  4. Replies: 11
    Last Post: 08-18-2005, 05:33 AM
  5. PEARSON HARDWARE
    By Bill in forum General/Off-Topic
    Replies: 10
    Last Post: 01-11-2005, 07:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts