+ Reply to Thread
Page 1 of 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 LastLast
Results 1 to 15 of 223

Thread: Commander 227

  1. #1
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Commander 227

    My wife and I picked up this Commander in Milwaukee a few weeks ago and are doing a "quick and dirty" make over to get her in the water ASAP.
    The sailing season is way too short here in Minnesota to dally. Over the winter we will give her a proper bottom job, repaint the freeboard and decks, install an Atomic 4 to replace the O.B. and build some cabnets in the cuddy. Until then; The glass under all 4 of the life line stanchions was damaged and the core was rotten. The bow pulpit was loose with minor rot. Sailing on inland lakes the life lines, bow and stern pulpits are not necessary and I think they wreck the pretty lines of the Commander so they will not be going back on. The head pump out and the cowl vent looked like they were never sealed and the core around them was very rotten. The cabin top was also quite soft and I think the forward hatch also wrecks the lines so we have to recore most of the cabin top. As we are going to be repainting the decks over the winter I'm not to concerned with preserving the original nonskid so I am doing most of the repairs from the top. I step drilled and filled nearly all the old hardware holes as We will be replacing most of the original hardware. Amazingly, the core around the chain plates is dry. The cuddy had to be completly sanded down as there was a badly peeling paint job inside. I'll post pics in allittle while.
    Attached Images          
    Last edited by Commander227; 06-17-2008 at 08:11 AM. Reason: add pics

  2. #2
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Some "before" pics

    Some "before" pics
    Attached Images    

  3. #3
    Join Date
    Mar 2006
    Location
    San Francisco - or Abroad
    Posts
    430
    Congratulations!!

    It is always nice to see more Commanders being rejuvenated!

    I agree with you on the Pushpit, stanchions & lifelines. They are not complementary to Alberg's lines. The Mephisto Cat appears to have been fortunate to come out of the factory without any of these apendages. It does have a nice period pulpit (much like yours) and I do like the look of that...

    Very nice work so far... Looking forward to more pictures. I am interested to see how your elimination of the forward hatch turns out. What will you do for ventilation / Light?
    Last edited by Rico; 06-23-2008 at 08:57 AM.

  4. #4
    Join Date
    Sep 2001
    Location
    Asst. Vice Commodore, NorthEast Fleet, Commander Division (Ret.) Brightwaters, N.Y.
    Posts
    1,823
    Very good!

    The Commander goes Commando

    Somebody around here would probably want to buy that pushpit

  5. #5
    Join Date
    Apr 2008
    Location
    Forsyth GA
    Posts
    396
    Commander 227, congratulations on your great find. You are very fortunate to purchase such a nice vessel. I would be very interested in purchasing your pulpit and possibly your pushpit. I'm working on an Ariel. Please keep me in mind if you desire to sell, I'm in no hurry. Thanks. Carl
    My Email address is listed in profile

  6. #6
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    227 gets wet

    We launched 227 yesterday and got in a couple of sails. Love the look and feel of her underway. I thought I could get by this season with the old main sail as it looked pretty good on the lawn, but it is pretty blown out and illshaped. The boat has more weather helm than I would like but I think its just the old sails draft being so far aft. I guess I gotta order one up. I have a new roller furling head sail but have not had a chance to build the furler yet. I'm not much of a fan of the outboard in the motor well, without being able to turn the outboard you really don't have any rudder in reverse. Can't wait till I can install the inboard.

  7. #7
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Coach roof

    Heres the hatchless coach roof with new balsa core. I'm not sure if I want to reinstall the grab rails, I think I prefer the clean look.Name:  phpYCJSVVAM.jpg
Views: 7469
Size:  48.7 KB

  8. #8
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    New traveler

    New Traveler with mid boom sheeting (just gotta rig it like my Ensign)
    Yeah, O.K.,... the outboard controls are a little hill-billy. Just temperary till I can get the A4 in.
    Attached Images  

  9. #9
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Fresh cuddy

    Had just a ball sanding out and repainting the cuddy. But the end result is worth it. I have new cushions being made.
    Attached Images  
    Last edited by Commander227; 06-23-2008 at 09:10 AM. Reason: Spelling

  10. #10
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Pulpit etal availible

    The pulpit, pushpit, stanchions and life lines off 227 are available to anybody who may need them within the Ariel/Commander class if said party is willing to arrange for (and pay for) packaging and shipping.
    The bundle as pictured measures about 5.5' X 5.5' X 2' which is probably larger than UPS or Fed Ex will handle. Pick up Zip is 55331. All parts are in really good shape, not bent up or pitted. I would love to see them go to good use within the Class so if you can figure out a way to get them to yourself without complicating my life too badly their yours.
    Attached Images  

  11. #11
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Hatch too

    Same goes for the hatch. Its in pretty good shape, it does however appear to be painted with house paint.
    Attached Images  

  12. #12
    Join Date
    Apr 2008
    Location
    Forsyth GA
    Posts
    396
    Mike,
    I don't know about the "quick and Dirty" makeover, The speed at which you accomplished the refit is an inspiration to procrastinators such as myself. The deck work and cabin work is certainly first-rate... very nicely done!

  13. #13
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Commander in the BVI

    I just ran accross these pics of a Commander I see when sailing in the Virgin Islands. What fun it would be to bang around the islands in a Commander instead of the sailing houses I'm always in.
    Attached Images      

  14. #14
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    The Princess takes a bullet

    Commander 227 was kinda handed her name by my friends around the marina.
    "The Princess"
    They have been calling her P.O.S. all summer..... I can only assume that means "Princess Of the Sea"
    Here's The Princess finishing a fall race. She finished 3rd but PHRFed her way to 1st.
    I have to race old man style as I haven't sprung for a spinnaker yet.
    Attached Images  

  15. #15
    Join Date
    May 2008
    Location
    Excelsior, Minnesota
    Posts
    326

    Getting kinda lonley around here

    The end is nigh
    Attached Images    

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts