"UHURU" is progressing well, albeit very slowly. I've put new windows
in the saloon. Planned to use the existing frames, but on removal they
were rotted and cracked and literally fell apart. So, I filled the gap
in the cabinside with epoxy glue and reinforced the edge with 2-inch
tape all around - two layers inside and out. Then bolted 10mm (just
less than 1/2") perspex (a clear plastic). I used the same method for
the side windows on the doghouse, using 6mm perspex. I don't think it
looks real "flash," but it was comparatively cheap when compared with
new frames and toughened glass. I used a sunlight UV resistant bedding
compound and it is neat but not flash, but super strong.
Reply With Quote