Ebb: "Starboard locker conversion to water tank. Doorskin to the bulkhead with the pencil lines proposes cutting the bulkhead back even further."
Ebb: "Starboard locker conversion to water tank. Doorskin to the bulkhead with the pencil lines proposes cutting the bulkhead back even further."
Ebb: "This is a trial idea in doorskin. What are the pros and cons? The laminated beam would go under the one already there (too massive! lost head room!). But it would open up the longer berth room the skipper requires. The doorskin shows a compass curve, the strongest architectural shape possible, in the only form possible, or am I missing something. The present compression beam with its struts imho is perfectly adequate. The arch is strangely more pleasing to me than what's there."
Ebb: "Deck has been lowered to accommodate 19.5-inch height of AirHead head. Discovered, after the yard leveled the boat, that the V'berths are higher at the fore end by 3/4-inch."
Ebb: "A 1/4-inch thick ply lid covers the sump here. Tank fittings exit here as do 3 pvc pipes from the focsl, anchor locker, V'berth bilge. Area under cockpit is waiting for battery compartment."
We had more photos of the drooling paint, but felt they were too embarrassing to post
Ebb, what did you use to coat the inside of your water tank?
Edit: Also did you glass straight the the existing plywood? If so did you lay any type of barrier to keep it from sticking to the ply (I can just imagine for some reason needing to remove it and all the explicitives that would accompany such a feet had it been bonded to the ply wood.)
Last edited by tha3rdman; 08-01-2006 at 10:48 AM.
#97 "Absum!"
WOW
I like the arch, but the interior is opened up very nicely already.
I'd go with the biggest windows possible for the dodger, even if you have to use vinyl windows. A handrail on either side would be good too.
Love the toerail