+ Reply to Thread
Results 1 to 15 of 472

Thread: EBB's PHOTO GALLERY THREAD

Hybrid View

  1. #1
    Join Date
    Sep 2001
    Location
    Asst. Vice Commodore, NorthEast Fleet, Commander Division (Ret.) Brightwaters, N.Y.
    Posts
    1,823
    That is astonishing. I'm slack-jawed.

    Sea Hood too!

    Hmmmmmmm........Sea Hood. I must have one.

  2. #2
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    HATCH HUTCH

    Ladies and Gentlemen. Step right up and view the very latest in hutches to cover hatches.

    #1 Hutch formed with urethane insulation foam

    #2 Foam covered in double knit "old man's cotton underwear"
    Attached Images  

  3. #3
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    #1 Two coats hi-build epoxy sanding prime with channels cut for lid

    #2 PVC channel ready to be epoxied into channels
    Attached Images  

  4. #4
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    Hutch sitting on lazarette hatch . . . to be continued.
    Attached Images  

  5. #5
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    WATER TANK

    Interested spectators. We now move from outside to inside and the conversion of the bilge to a water tank. First, of course, is removal of the original sole plywood.
    Attached Images  

  6. #6
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    View looking forward showing old plywood sole to the left, prepped "bilge" center and paper baffle pattern to the right.
    Attached Images  

  7. #7
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    #1 First bulkhead installed at end of ballast keel (with original cover of mat & polyester left in place). Bulkhead establishes both the new top of the tank and the sole. [Displayed are Ebb's favorite tools, except for the Makita angle grinder - that's not a favorite.]

    #2 View of bilge area under cockpit. Mat & epoxy lines the sump and helps support the end bulkhead. Bulkheads were cut using paperboard patterns.
    Attached Images  

  8. #8
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    Quote Originally Posted by Bill
    Hutch sitting on lazarette hatch . . . to be continued.

    A slicker version of the outboard motor well on the Atom website?
    http://www.atomvoyages.com/projects/TaipanRefit.htm

    Or perhaps a hunker hole when you get in trouble and your cabin area has been taken up by the emergency inflatable flotation system?

    Do tell...
    Last edited by mbd; 02-13-2005 at 08:25 AM.

  9. #9
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621
    (Jim did a nize job on that Taipan!

    Hey, I'm no David Blaine, but the motor don't tilt and the bilge don't hold no water!)

    Swear you'll like the lid when it's done...
    Rather have you swear at it,
    rather than ignore it.
    Last edited by ebb; 02-13-2005 at 08:32 AM.

  10. #10
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    Also, I'm still trying to come to grips with the irony of picturing Ebb at a marina pumping water INTO his bilge! Nice idea, BTW, easy to inspect/clean.

    Actually, I think he's just trying to one-up the McGregor crowd by making that extra ballast usable. Heck, kick it up a notch use it as a tub!
    Last edited by mbd; 02-13-2005 at 08:47 AM.

+ Reply to Thread

Similar Threads

  1. A-228 - GEOFF's AUSSIE PHOTO GALLERY
    By Bill in forum Gallery
    Replies: 167
    Last Post: 05-10-2017, 05:31 AM
  2. Portrait Gallery
    By ebb in forum Gallery
    Replies: 5
    Last Post: 10-09-2005, 08:51 AM
  3. MALISZEWSKI'S PHOTO GALLERY
    By Bill in forum Gallery
    Replies: 7
    Last Post: 07-25-2003, 08:56 AM
  4. Photo Attachments - Bigger isn't always Better!
    By Dan Maliszewski in forum General/Off-Topic
    Replies: 2
    Last Post: 01-06-2003, 09:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts