Easy Chair in foreground with locker and slide box. Background shows galley without sink counter - sliding panel cupboard.
Easy Chair in foreground with locker and slide box. Background shows galley without sink counter - sliding panel cupboard.
Starboard dinette lockers with lift lids. Insulated hull with vinyl fabric. Uncovered Ensolite insulation glued in on top of hull. Top of photo is the unfinished cabin side hand rail.
Port side, left corner of foto is galley without sink - and easy chair.
Starboard side, dinette without hinged table.
Stub bulkheads glue up for cabin furniture. Easy Chair.
Interior hand rail inserts glued thru cabin side.
Compression beam being bolted thru the deck. Compression beam series of thru-deck bronze bolts. Center three go thru previously epoxy and Xmatt reconstruction directly under mast. Outer bolts pass thru composite balsa core with classic hockey-puck treatment - oversized holes and undercut skin. The original unglued support beam was locked in place with only two #16 bronze screws driven thru the circular mast-step into the beam under balsa-cored deck.
Posting Permissions
Reply With Quote