The following photos follow up on the above scupper discussion.
#1 shows a cast bronze quarter plate for a split back stay. Note that the toe rail gutter is originally and still open at the stern.
# 2 shows the port bronze chain plates. They are tilted to the angle of each shrouds. Fastenings are 1/2" strut bolts.
#3 shows a port scupper. Note that the scupper slants aft. Scuppers are a separate liner that is glued in place.
#4 shows the three scuppers on the port side. The wood rail closes off the top of these openings. Not made for leading rope.
Reply With Quote