+ Reply to Thread
Results 1 to 15 of 249

Thread: A-50 Revival

Hybrid View

  1. #1
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    592

    Talking Holy Hose !!!

    Bill .. if I could tell you how all that worked I would have needed to graduate from Harvard. The guy who installed it must have just bought shares in the hose manufacturing company.....or possibly the company making the plastic 'ties'. There was honestly OVER 60ft of hose total and had to be 100 ties !!! While I have NO doubt this system could ' slice,dice and do julian french fries ' I just couldn't figure it out. All joking aside , you could pump head to tank , head over board and tank overboard......I just couldn't find the instructions. The big attraction to the Ariel was the pleasing lines and simplicity of sailing a small boat.....so ...45ft of 1 1/2 hose , 98 ties and 3 Y valves later I have a simple system again. Guess I should have got that engineering degree !! Frank #50

  2. #2
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Varnishing Rack

    Frank has been busy remodeling REVIVAL. Here is his "varnishing rack" for the trim. That piece with the holes will show up later on the maincabin side of the strongback.
    Attached Images  

  3. #3
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    Here is the new "self draining" anchor locker in progress . . .
    Attached Images  

  4. #4
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    Here is the completed look. Note the new hatch cover. It was shown earlier on the varnishing rack . . . Frank says to note the storage below . . .
    Attached Images  

  5. #5
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    592

    thief

    Bill .. I stole the anchor locker idea from the triton site. Frank #50

  6. #6
    Join Date
    Apr 2004
    Location
    Pensacola, FL
    Posts
    725

    Thumbs up Cool !

    That is a cool mod Frank.

    How much chain do you plan to carry? how much higher would you estimate that shelf would make the chain?

    I like the mod, and would think it would be a good way to 'segregate' the chain locker. I plan to carry more chain then I really want to use on a regular basis. Maybe the regular rode (mine is 150') with 30' or so could ride on the shelf while the remainder is laying at the ready below, with the spare anchor and other stuff that could get stand to get wet every once and a while.

  7. #7
    Join Date
    May 2004
    Location
    Pembroke Ontario Canada
    Posts
    592

    Wink Anchor locker

    I carry 50ft chain and 150 rode there. I have a further 100ft chain in a bucket in the bilge (ballest) if needed. The lower erea should not get wet. The 'shelf' drains forward and overboard and is 'glassed' in . I'll let you know if it works out in practice like in theory.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts