In what has begun as a minor re-fit, 'Faith' has now had the hull to deck joint glassed over from the inside across the transom, and inside the lazarette.

I filled the joint with epoxy on the outside.

I actually purchased the 5200 to re-caulk the joint, as per the manual but have discovered that the screws were replaced by larger, longer screws that have gone on through into the cabin.

I am now working forward, the rest of the way around. I will epoxy 1" band of fiberglass, and fill and fair the outside.

Would not be so bad, but have also undertaken the ice box rip out, topside repainting, brightwork refinishing, belowdecks fuel storage, and a myriad of other projects at the same time.

It is hopeless. I can not stop myself... I must seek help.