Nice snug fit. Thank you Home Depot.
Nice snug fit. Thank you Home Depot.
Last edited by Hull376; 12-10-2004 at 07:51 PM.
Kent
Coffee is on.
Last edited by Hull376; 12-10-2004 at 07:53 PM.
Kent
Don't make fun of the curtains. My daughter picked em out. I didn't have the heart to tell her "NO."
Kent
After 18 months, these cheap $10 3" computer fans from Radio Shack still work. I leave them on all the time (except in this photo). This one pushes out into the cockpit. One under the front cowl vent draws air in. They keep the air moving through so I don't show up to a stuffy, smelly boat. Heck of a lot cheaper than those $100+ jobs that WM sells. Can seal off the cockpit vent---- in foul weather. Lots of water could come in here in a big blow if you're pooped. This hole is where the old mechanical knot meter was located.
Last edited by Hull376; 12-10-2004 at 10:40 PM.
Kent
Will finish off with two outside shots. Back to front----------
Kent
And front to back. Hey Tony, I know you love pictures, but don't look at those curtains too long or you'll go blind. Say Ebb, you been researching what you're going to paste on your portlights? Haven't heard anything on this subject. Maybe we need to start a "bilious, hilarious, awful" curtain thread!
Last edited by Hull376; 12-10-2004 at 07:45 PM.
Kent
OOOPs. Forgot to put this pic of the V berth in. Look really close and you can see the "Suck-In" cheapo fan doing its thing!
Kent
hi Kent I was just admiring the fine job you have done on 376. The picture of it on the hard just after the paint job reminds me of 2 things. 1 - Albergs fine underbodies make them look as good out of the water as in it ! 2 - it made me think of an article I read in cruising world by Bernedette Bernon on that "majic moment" when after all your work you can finally "peel back the tape" step back..and look at the finished product you"ve created. How as you peel it back ...the boat comes to life. I am sure you were very proud when you "peeled the tape" on 376 !! Job WELL DONE ! #50
I went with about 10 other sailing vessels to Smith Point this past weekend. Only 15 miles by water from Houston's Clear lake, but a hundred miles by land. It was a different world. Nothin but oystermen, shrimpers, and birds. One of the boats caught this pic of us just underway
Last edited by Hull376; 08-11-2006 at 08:40 PM.
Kent
I just noticed in Post #12 there seems to be a "cove" on the right where your counter top follows up under the port cockpit seat. This confused me, because my back splash is straigh accross, from under the c'way from what I imagine is the well in the cockpit floor, to the port hull side.
Edit: Also your boom seems high, is it on a track or on a fixed mount? I was thinking about ditching the down-haul track. (does it make sense to have a down haul and a winch on the hallard?)
Last edited by tha3rdman; 08-09-2006 at 05:09 AM.
#97 "Absum!"
Took 376 out this week for a look at the bottom (in the water for two years, ugh!). Y'all better keep a zinc on your rudder shoes (see post in technical). The yard crew kept asking how old the boat was. They said that the glass on the bottom was in far better shape than many newer boats they work on. Previous bottom was Interlux ACT ablative, had about 10 barnacles, after pressure washing, no paint left! Put Micron CSC on this time--- see how that works.
Kent
A couple more pics.
Kent
Almost back in the drink. I wonder what happens if a stray radio signal is received by the remote controlled haul out beast? I wouldn't want to be around to see it. I didn't want to ask the guy operating it (yellow wireless control around his neck) what happens if his batteries go dead.
Kent