-
According to the drawing on P-162 of the ACYA manual, the A-C mast is .130 inch thick. Pounds per foot 2.338. Extruder was Alcoa # T-1812. Alloy 6061T6. A-C mast length 30'-3"
This same mast is also found on the Triton, but five feet longer than the A-C mast. It's possible that a "used" Triton mast could be a less expensive alternative to new. Note too that Rig-Rite, Inc produces the boom for the A-C yachts (Pearson Yachts RR #3522). They also may be able to help with the mast.
Rig-Rite, Inc
63 Centerville Rd
Warwick, RI 02886
401-739-1140
www.rigrite.com
-
thank you, but I think I'm the only Ariel in France and only 60 Triton were made by Jouet and I think there are not any more. I was asking for mast feature because I saw profiles and they are either much smaller or slightly larger in width. But those slightly larger are between 2.9 and 3.2 kg / m which is below 2.338 Pounds per foot (2.54kg / m). I did not really want to soften the mat since it is overdimensioned.
when i go to remove the mast I will try to keep it but it has already been shorten 3 inches and the base is corroded and split on 1 inch.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules