+ Reply to Thread
Results 1 to 15 of 15

Thread: Asym on Commander or Ariel

  1. #1
    Join Date
    May 2016
    Location
    East Hampton, CT
    Posts
    18

    Asym on Commander or Ariel

    Anyone flying one? It's something I'd like to do, all on the cheap, of course, and would love to know what people are using for a set-up, and what they're using for a sail. I'm new to the Commander, and already love it, but I'm noticing it that it's not a light-air boat. I'd like to have this as an option.

  2. #2
    Join Date
    Jul 2015
    Location
    Eastern, CT
    Posts
    35
    I fly a traditional chute as an asymmetrical. it's a little wonky at the shoulders but it works.

  3. #3
    Join Date
    May 2016
    Location
    East Hampton, CT
    Posts
    18
    What are you attaching the tack to? I'm actually considering converting the boom of a Laser to a makeshift bowsprit, but thought there must be much more clever ideas out there, already in use.

  4. #4
    Join Date
    Jul 2015
    Location
    Eastern, CT
    Posts
    35
    I attach the tack to the same clip I attach the jib tack to. I use an 18" painter? to raise it off the deck and a clip at the tack to keep it on the headstay. Works like a champ. I should have it recut but have heard it compromises the design strength so leave it alone.

  5. #5
    Join Date
    May 2016
    Location
    East Hampton, CT
    Posts
    18
    Thanks, Roy -- just the info. I was looking for. I've got an old J/24 chute that would probably work just fine until I can locate the real thing. Definitely going to try that set-up.

  6. #6
    Join Date
    Jul 2015
    Location
    Eastern, CT
    Posts
    35
    My chute came from an O'day 27. Found it on craigslist a few years ago. Butt ugly color scheme but it is in good shape so I use it.

  7. #7
    Join Date
    Jul 2015
    Location
    Eastern, CT
    Posts
    35
    Check this out for flying a traditional chute. Read the details as it mentions usable for traditional chutes. http://www.westmarine.com/buy/atn--t...02_063_002_505

  8. #8
    Join Date
    May 2016
    Location
    East Hampton, CT
    Posts
    18
    Ha! That's basically what you're doing when you clip to the headstay! That device just goes over a rolled headsail. Not an issue for me with my hank-on jibs. I'm going to try that setup in the next few days. I have high hopes -- thanks for the advice!

  9. #9
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    I'd like to see some pictures of your set-up for that. I have 2 spins that have never been flown. http://www.pearsonariel.org/discussi...5481#post15481

  10. #10
    Join Date
    May 2016
    Location
    East Hampton, CT
    Posts
    18
    Hey Kyle, I've flown a J/24 chute the last two days on my Commander using Roy's suggested set-up and it's worked awesome. I don't have pics of what I rigged yet, but essentially it's a 22" line with a shackle at either end. Attach one end of that 22" line to the same attachment point you're hooking the tack of the jib to, and then attach one side of the spinnaker to the other end, which you also clip to the headstay. Essentially, all you're doing is creating an attachment point for the tack of the spinnaker on the headstay that will clear the bow pulpit. Then attach your spinnaker sheets to the other side of the spinnaker and raise it with your jib halyard, being sure, of course, that everything is run forward of the headstay. Jibe the spinnaker around the front of the headstay. The shoulders of a symmetrical get a little wonky on a tight reach, but otherwise the spinnaker looks pretty amazing and works great. I've found that taking the mainsail down completely allows for clearer air for the spinnaker, making it easier to fly, and you don't lose any boat speed.

  11. #11
    Join Date
    May 2016
    Location
    East Hampton, CT
    Posts
    18
    Here's a pic of the chute flying the other day. Not sure how helpful the photo is as far as that 22" line is concerned, but at least you get the gist.

    -Bob
    Attached Images  

  12. #12
    Join Date
    May 2016
    Location
    East Hampton, CT
    Posts
    18
    I saw the the boat surveyor you used when you bought the boat called your sail inventory "painter's tarps." What do you call a spinnaker that mice have pissed in for 10 years, and is comprised of 1/3 sail tape, I wonder? There have to be a million old J/24 spinnakers lying around, though, waiting for someone like me to come along. If anyone on this board has a spinnaker -- asym or symmetrical -- or any hank-on headsail they'd let go cheap, do drop me a line, please.

  13. #13
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    Bob, post your sail request on the Off Topic forum. Also, check the forum for sail listings. I'll be posting a thread shortly for a long time member who no longer has an Ariel, but still has some sails and cabin cushions.

  14. #14
    Join Date
    Apr 2002
    Location
    Houston, Texas
    Posts
    329
    I've sailed with the symmetrical over the years- with and without the pole. Most of the time I was lazy or short handed when the pole was left on the deck. You're limited in how far downwind you can go and keep it filled. I used an adjustable down haul to allow the tack to rise when heading further downwind. Attached is the Home Depot contraption I use to hook the tack over my furled headsail. Anything that slides up and down over Dacron will work.
    Attached Images  
    Last edited by Hull376; 07-13-2016 at 01:14 PM.
    Kent

  15. #15
    Join Date
    Jul 2015
    Location
    Eastern, CT
    Posts
    35
    Slick device. I've recently see a bunch of videos of chutes flying WITHOUT a sliding shackle or furled headsail device on the head stay but simply tacked to the bow with a 5' painter(?)

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts