Results 1 to 15 of 54

Thread: Commander #38

Threaded View

  1. #36
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621

    sanding? arrrgh!

    Mike, Screwed up my mast rehab, have to remove moisture cure urethane and failed WR-LPU.

    Can't deal with grinding stuff off anymore. Just stumbled onto this stuff.

    Just ordered this stripper from Rockler Woodworking & Hardware, 1-800-279-4441

    Soy-Gel TM Paint and Urethane Remover
    non-toxic , low VOC, work without gloves, without particle mask, bio-degradable,
    get it on yer hands no burn. Best use for soy beans I've ever seen!
    Wouldn't it be great if this is as fantastic as it sounds.

    Maybe you can get it to work overhead in the boat -- hold it on with seranwrap..


    Looks like the best stripper ever!
    Must be fairly new. Home internet site useless.
    There's a few YouTubes, gotta check it out!

    They have another, haven't researched it but there is an extensive YouTube
    showing bottom paint being removed from a 27footer, called Soy Stripper,
    Must be the same maker.

    Good luck!
    Last edited by ebb; 09-21-2015 at 09:49 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts