What a differance a 1/32" makes
For my DC panel sides I had cut some scrap pieces of meranti 12MM plywood to enclose it with. I used the same for the enclosure for the 110VAC outlet. I did not want to paint these sides white but they just didn't look good with the Phillipine mahogany finished with varnish. Then I remembered I had bought a small packet of quartered mahogany veneer at a wood working show a couple of years ago and never used it. So I veneered the faces of the sides that will show and you can judge for yourselves if it was worth the 1/2 hour it took me to do it. The small piece at the top is meranti with varnish on it and the other two are the ones I veneered.
The second picture is the latest batch of parts getting finished.
JERRY CARPENTER - C147
A man can succeed at almost anything for which he has unlimited enthusiam.
Reply With Quote