The little piece of wood trim that came on "Destiny's main companionway hatch did not allow for an easy way to grasp the hatch and slide it back and forth. So I decided to make somethiing for it that was more accomodating to my fat fingers.

This was not a real easy task as I found out when trying to make the new hand hold. The curvature of the hatch is not a smooth radius so I found I had to first cut and shape the bottom of the new piece to match the shape of the hatch. Then 2-1/4" above that point I had to draw and cut a true radius that would allow me to use the top as an indexing point for the 4 router bits it would take me to make the profile I wanted to make.

This first picture is the profile of the new hand hold.

Name: hatch hand hold.jpg Views: 2660 Size: 25.0 KB

This second picture is the view showing how it looks on the hatch.

Name: companionway hatch hand hold.jpg Views: 2670 Size: 38.2 KB