I put one on my boat and no problem with the Nissan 6hp (which I have) fitting in the well. OK clearance from the top or from the front side of the well of the standard issue Ariel.
I put one on my boat and no problem with the Nissan 6hp (which I have) fitting in the well. OK clearance from the top or from the front side of the well of the standard issue Ariel.
Kent
I had a Nissan 6hp on my ariel and would simply open the lazzerette, turn the engine sideways, and then give it one pull straight out to start. It was simple and it worked so the cord could be pulled at the preferrred angle without chafe. Once it was running, I would turn it back to the correct orientation.
See these pics of the vertical pull on my Nissan. The red circle on the second photo shows the two screws that attach the pull to the motor. The piece does not extend as far out from the cover as the bottom handle does (see in first pic)
Kent
Thanks for the pictures, Kent. I see how it goes on now. It looks like it should fit. I was going to send it back ... but I was told that they wouldn't accept returns ... Now, it looks as though I will be able to use it ... which was the point of buying it in the first place!