While working on Vahalla, and leaning on the lifeline, I noticed that the aft padeye was lifting. With little effort I removed the padeye. The original hardware seemed to have been chrome plated bronze. The center of the machine screws was a nice barn red.

The pad is designed for 12-24 flat headed machine screws. 1/4-20 will not go through the holes. I have the holes plugged with 12-24 x 2" zinc plated machine screws so I know that they exist in some fashion. Before taking out my No 8 drill and fixing everything, I thought I'd try to locate the SS hardware.

Jamestown has SS at 1/2 and 3/4 inches and I have to buy a box. Is there anyone else stocking or manufacturing 12-24 x 1 1/2" Do I go to a machine shop and have them make 10 pieces? Any suggestions?