Ariel #331

[Tim D.]

So I pretty much have the rewiring done, placing switch, fuses and controllers under the top step with batteries underneath

I also moved the switches from there original location over my galley to a panel above my chart table with the radio. This area will also have a plug for the GPS

The original switch box has been changed to a housing for the depth sounder and outside 12v outlet on the outside and solenoid switch for the LPG on the inside.

You may notice that in order to run new wires to the original switch box I had to open up the corner of the chase. apparently some of the original wiring had been resined into the chase making pulling new wires very difficult. I did though manage to get them all in there including the transducer pick-up wire.