+ Reply to Thread
Page 1 of 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 LastLast
Results 1 to 15 of 292

Thread: The album of Ariel #422

  1. #1
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    609

    The album of Ariel #422

    Went up to the boat last night, to spend my first night aboard. Turned out to be good timing - a strong cold front ripped through during the whole morning, and gusts at one point were in the 60 mph range.

    Here are some pics of Katie Marie, just glamour shots really. The bad-stuff pics will come soon enough, right before the rebuilding ones. Sheś in great shape overall, but does need some fixing. All in due time - right now, it was a distinct pleasure to just be onboard for 18 or so hours, seeing how it felt. I like it. A lot.



















    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  2. #2
    Join Date
    Sep 2001
    Location
    Asst. Vice Commodore, NorthEast Fleet, Commander Division (Ret.) Brightwaters, N.Y.
    Posts
    1,823
    Look at that Brightwork. Gorgeous.

  3. #3
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621
    She looks absolutely choice and original!
    AH h h the choices one must make.
    What to keep and what original?

    Looks like she just came from the boat show.
    Love that clean unadorned look,
    such a pretty boat!

  4. #4
    Join Date
    Apr 2004
    Location
    Pensacola, FL
    Posts
    725

    Arrow Yea but....

    Yea but....



















    In person she looks......




























    [size=7]Even better....[/size]







    There are things that the pictures don't show well, like the fact that the window frames are factroy perfect.

    This is a very well cared for boat, she has obviously recieved good care through her life.

    It is a good thing that she has gone to Kurt.


    (Even if I am a little jealous that he will not have to suffer with the brightwork as I have.)

  5. #5
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    609

    Katie Marie gets home

    I brought Katie Marie home this weekend. It was a wild trip, I'll write it all up in a day or so. Suffice to say I motored 122 miles in 34.25 hours total time (point to point), and was stopped/not moving for about 8 hours of that. The 6hp Merc 4 stroke worked like a champ, fuel usage was about .25 gallons per hour, the whole trip only took 7 gallons of fuel. The boat handled like a dream, even in 3-4+ foot short-period swells coming upriver under the lash of sustained winds at 25 with gusts to 35. Here's a little eye-candy that tells part of the tale.

    This shot I took Monday morning shows the salt buildup from bashing into the Cape Fear River so much on Sunday. The glass to the right has been splashed with freshwater, the left one is still salt-encrusted. I was glad for the tall cabin trunk on Sunday - sort of like a built-in dodger.



    And here's Katie Marie tied up here in her new slip. Finally.

    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  6. #6
    Join Date
    Sep 2001
    Location
    Hampton Roads Va.
    Posts
    821

    Thumbs up She Looking Good!

    Twas a fun front that blasted thru this weekend, Huh!
    Sorry I couldn't buy you a mug of Arrogant Bastard IPA, I drank yours and mine so it didn't go to waste .

  7. #7
    Join Date
    Sep 2001
    Location
    Asst. Vice Commodore, NorthEast Fleet, Commander Division (Ret.) Brightwaters, N.Y.
    Posts
    1,823
    Welcome home Kurt.

    That boat is cherry.

    Now forget those plans to change the ports.


    Signed,

    The Voice of Reason

  8. #8
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    609
    The story is up on my site. A bit rough around the edges yet, and I have more pictures to include, but if you like reading, it's plenty long...

    Katie Marie comes Home

    PS - LOL at Mike and C'pete! Mike - I had White Russians instead. Pete - no plans on these ports yet, altho' I may swap them for some nice white plastic ones.


    Um, not.
    Last edited by CapnK; 04-06-2005 at 10:47 AM.
    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  9. #9
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    609

    Good for the Sole

    Woke up this morning at 6:30AM for my first full day as a liveaboard onboard an Ariel. That's kind of late for me to sleep onboard, but dawn broke behind the clouds, and it stayed a bit darker than usual. Last night, I got the starboard settee bunk to myself, while the CrewDogs took the V-berth (although Buffett came down sometime in the night for a while - I remember a wet nose in the face early in the AM). They like the new boat, although they need helping up and down the companionway.

    It was kind of chilly last night, so I had both hatchboards in while I slept, leaving the sliding hatch cracked back 8 or 10 inches for a light breeze. This morning, I stuffed a drink coozee in between the boards, and it opened up a slit about 4" wide right at eye level. Standing at the companionway, coffee cup in hand, peering out and down the length of Winyah Bay, I felt right at home, and I smiled at my new boat.

    Thank you, Mr. Alberg. Your ideas live on, as part of my Dream.

    After coffee, I started on The Work. I made up a list of things that needed doing more or less right away, staring into space, down towards the cabin sole, inbetween jotting my tasks down. That's when I realized what I'd do first. I broke out a sheet of 100 grit, got down on hands and knees, and gave the sole a good abrasive cleaning, followed by a couple thick coats of teak oil. While I had the oil out, I went ahead and wiped down all the other teak and mahogany in the main cabin, and now she's just a little bit prettier belowdecks, and I've accomplished my first task in her restoration.

    I've some things I'll be asking about soon, I need to take some pics to show you all what it is I'm going to be asking about. Katie's in great shape for a somewhat aged lady, but there is a lot I can do to make her even better. I'm looking forward to it, to seeing her sparkle and shine again, and to feel her come alive under the pull of full sails. Ain't it great?
    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  10. #10
    Join Date
    Apr 2004
    Location
    Pensacola, FL
    Posts
    725

    Wink Yup.

    Ain't it great?
    Yup.

    Sure is.

  11. #11
    Join Date
    Sep 2001
    Location
    Asst. Vice Commodore, NorthEast Fleet, Commander Division (Ret.) Brightwaters, N.Y.
    Posts
    1,823
    Did you teach those pups to sail yet?

    Gotta earn their keep
    Attached Images  

  12. #12
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    609

    Bizee, bizee, bi-izee

    Nothing fancy to show y'all picture-wise, really, just another angle on Katie in her slip. I've been busy, though.

    I pulled her handrails, coamings, winch bases, etc (all the cockpit wood except the tiller), and am in the process of refinishing it all in a proper manner, as befits a beatifully aging Lady. Her companionway and handrails were finished with some type of urethane, I think, while all the wood around the cockpit was done with Cetol, so I wanted to bring it all together for commonality of look, and ease of upkeep. Katie has both mahogany and teak, so I'm finishing them clear, no stain, and letting the color of the wood determine her look.

    I've heard from several folks that the various urethanes, if they start failing, fail completely, and, after the fun involved in stripping all of the various PO's types of coatings, I'll not risk that. Too bad though, as Katie already had urethane on the companionway area. Knowing that, and being an eager beaver, I'd jumped the gun on the refinishing project, and only heard of the potential failure after I'd bought some urethane and applied it to the little lazarette hatch. I came really close to trying a product called "Bristol Finish" (actually bought the stuff, but after leaving the store, realized...well, read on), but my local MegaSuperMarineStore only had the interior type of that product (ah - no UV protection! I took it back, having learned that it pays to read the tiny letters...), so I chose the more traditional route and will redo all of the brightwork with varnish, as it can be maintained on-the-fly whenever needed.

    I'm leaving the companionway alone for right now (it's in fine shape), but everything else was taken down to bare wood (lots of fun taking off who knows how many years of various types of sealant goo in the "hidden" areas). That was an adventure in and of itself - after trying various options, my favorite stripper for finishings is what is commonly known as "80 Grit". This material, when attached to an electrical vibrating device designed to apply it in an most efficient manner, makes light work of thin layers of varnishes, even when there are several of them, some of which nearly predate me, I think.

    I've moved beyond that stage of the project, and am applying several layers of epoxy to the bare wood as a strengthening and sealing undercoat. A third coat of epoxy is curing on the wood as I type (and some of it is curing on my clothing and person), and I hope that tomorrow I'll be able to sand all of that nice and flat and smooth, in preparation for 6 or so coats of varnish this coming week. Between laying on the varnish, I'll be attempting to repair and refinish the gelcoat immediately adjacent to where the wood goes, in order to have that part of the deck refinish done while the wood is off the boat. That is the status of my major project of the moment.

    My other "biggie" that I've done was to construct a simple icebox of pink foam sheet and duct tape. I wanted to make a quick and somewhat temporary icebox and place it onboard in order to have an idea if my thinking/planning about it is good, and it has worked out well. Well, almost, or mostly - at any rate, it was close.

    I figured out I wanted to try it in place set to port on the settee, just aft of the little cabinets on that side. I measured everything in the area twice so that I knew it would fit, got my materials, and went about constructing the box at my storage unit. 2 layers of 1" thick sheet foam, with a radiant heat barrier sandwiched between the layers, held together for now with the duct tape. For a quick job, it came out nice, and it wasn't until I was less than 1/2 mile from the marina that I realized the one thing I hadn't measured was the companionway width. In the words of Homer (Simpson), "Doh!!!".

    I got lucky. It wouldn't fit in the companionway, and I cursed at myself for my oversight as raindrops from an approaching storm began to fall. It was between 1/2" and 3/4" wider than the companionway opening. Then I realized that the trim in which the dropboards fit made the vertical part of the companionway just a bit smaller than the part under the sliding hatch, so I swung the boom over, and was so pleasantly surprised to see that it fit with less than 1/8" clearance on each side. Yeeha!! I love it when a plan comes together.

    I've also spread some paint around the interior, cleaning up her appearance a bit and making it more obvious when CrewDog fur begins to build up and she needs a cleaning (that's every 2-3 days). The dogs both love the boat, and I've gotten in better shape since now I have to lift them bodily down into and up out of the cabin. They get the V-berth, and I sleep in the starboard settee. In another month or so, I hope to get some stanchions and lifelines on her, mostly in order to hang netting on so that Buffett feels comfortable going forward, and will get out of my way in the cockpit.

    I've gotten the newsletters scanned, they are on the computer at the storage unit. C'pete - I'll be mailing your copies back soon, and Bill, I'll get them onto this computer and will transfer them to my website so you can download them before long. I'll get some pics of the brightwork and icebox to put in here for y'all to critique and/or laugh at also.

    I'd be sailing more, but I'm still waiting on my Title/Bill of Sale to come in, which is a bit of a bummer. There is a Coast Guard station right next to the marina, so I'm hesitant to get out on the water without the paperwork which proves I'm the legal owner. I did sail her a few weekends ago, and quite handily outran a Scanmar 31 which lives on my dock, and I am very impressed with her sailing abilties. She tacks like a dream, points really well, has good handling overall (except under power coming into a slip with 3-4 kts of current - yikes!) and I'm really looking forward to heading offshore with her and feeling some swell under her keel.

    When the brightwork is finished, I'll be pulling chainplate bolts to see if she is capable of just that.

    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  13. #13
    Join Date
    Apr 2004
    Location
    Pensacola, FL
    Posts
    725

    Thumbs up

    .....so I chose the more traditional route and will redo all of the brightwork with varnish, as it can be maintained on-the-fly whenever needed.
    Bless you man....






    Just for the record, the bright work on Katie Marie looked pretty darn good to begin with, Kurt.


    s/v 'Faith'

    1964 Ariel #226
    Link to our travels on Sailfar.net

  14. #14
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    609

    Picture updates - Cabin overhead

    First off, the cabin liner in Katie Marie is very dull - I don't think it's been polished in *years*. I'm using 3M's Marine Fiberglass Restorer and Cleaner and doing a section of the overhead every day. This pic shows the difference the stuff makes, and it is quite easy to use (except for the "overhead" part - which is a great shoulder and neck workout... ). Obviously, the left side is not yet done, while the area to the right has been. Big difference, eh? I'm glad to see it shining up so well.

    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  15. #15
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    609

    The new (temporary) icebox

    Here is the genius bit of craftmanship you have been wondering about. I hate to put these photos up, and make Ebb's work look so, well, unfinished, but here we go...

    "Technical discussion" follows the photos...

    Here's the new box -



    and here's a slightly different perspective which shows its size better, and how it sits in relation to the rest of the interior -



    here with the lid open -



    and last, looking down inside -



    I made the box simply and easily, because I knew I'd probably be remaking the box. I will be remaking it (a bit smaller), but I also made it functional since, as a liveaboard, I need to be able to keep the bee... um, soda (yeah, that's it, "soda") cold, along with cold cuts and bread, etc..., so it is a "working" prototype.

    I used 1" thick sheet foam from a hardware store, and a radiant heat barrier material sandwiched between the outermost layer of foam and the 2nd layer. The 3rd, innermost layer of foam I added a week after the rest, after testing out to see how well just 2" of foam did. 3" works *much* better, so I may even go to 4" in the final version. The construction is simple - I cut the foam with a blade, and staggered the corner joints, sealing them with good old duct tape at every layer. I did not get too involved in the lid; the final version will have more than 1" of foam. For now, I am using a "floating inner lid" of 1" foam and some of the radiant barrier, placing it directly on top of the foodstuffs inside. I'm using the large (approx. 9" square, 1.5" thick) refreezable blue ice substitute thingamajingers, and am getting 4 days of cold from 2 of them inside the box. This is much less volume than a bag of ice, I'd probably get more time using an 8# bag of ice, but thats expensive sorta (although less so than it was, since the extra foam gives the box longer legs...).

    I will do a drawing with the dimensions on it, and post that later (in a few days).
    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

+ Reply to Thread

Similar Threads

  1. Ariel #258 on E-bay "Rum Runner"
    By tha3rdman in forum General/Off-Topic
    Replies: 2
    Last Post: 08-10-2006, 06:03 PM
  2. Ariel 18 (another RI ariel in long term storage)
    By bill@ariel231 in forum General/Off-Topic
    Replies: 4
    Last Post: 07-18-2006, 10:25 AM
  3. Ariel #382
    By Tim61N in forum Gallery
    Replies: 11
    Last Post: 10-30-2005, 07:07 AM
  4. Ariel (483?) for sale on E-bay
    By c_amos in forum General/Off-Topic
    Replies: 9
    Last Post: 12-06-2004, 08:12 AM
  5. What would you do?
    By Kiwi in forum Sailing and Events
    Replies: 3
    Last Post: 11-27-2004, 08:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts