My rough measurement of the roof thickness on either side of the forward hatch of Valhalla comes to a smidgen less than 5/8" thickness. Does this sound right? I plan to drill a holes on either side of the step about 5/16" deep.
This is rough and gotten by measuring the height of the clamp screw of a c-clamp clamped on the roof and then measuring the clamp opening after removing the clamp and resetting the clamp screw to the measured height.
Last edited by John; 05-16-2010 at 10:39 AM.
John G.
Valhalla
Commander No 287