Results 1 to 15 of 90

Thread: STRONGBACK DISCUSSION etc.

Threaded View

  1. 05-26-2009 04:12 PM #11
    ebb
    ebb is offline Registered User ebb will become famous soon enough ebb will become famous soon enough
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621
    Scott,
    By the way GELCOAT does stick to EPOXY.

    The epoxy must be carefully measured and mixed. Must be fully cured. Must be NO BLUSH.
    My specs would say: 100% solids - 1 to 1 or 1 to 2 parts premium epoxy, so that there is no solvent out gassing to mess with the polyester.
    Then it should be sanded with 60 grit.

    Gelcoat will stick to epoxy.
    But why would you want to use gelcoat over perfectly good epoxy?
    Last edited by ebb; 05-26-2009 at 04:14 PM.
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Similar Threads

  1. All those wires inside my mast gotta go!
    By Scott Galloway in forum Technical
    Replies: 26
    Last Post: 07-04-2007, 07:40 AM
  2. Commander- replace mast support with cross beam
    By beugenides in forum Technical
    Replies: 2
    Last Post: 01-11-2005, 12:04 PM
  3. Tabernacle Operation
    By Scott Galloway in forum Technical
    Replies: 17
    Last Post: 09-04-2003, 08:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules