+ Reply to Thread
Results 1 to 4 of 4

Thread: Coaming-to-cabin filler block dimensions - Commander

  1. #1
    Join Date
    Jun 2020
    Location
    Irondequoit Bay, Lake Ontario
    Posts
    3

    Coaming-to-cabin filler block dimensions - Commander

    In response to an inquiry, here are a series, the first 5, of 10 photos which show the dimensions of the block at the forward end of the coaming that attaches to the cabin. These images show the dimension of the starboard side on my boat. Make a prototype, first, from 2"x10" scrap to assure proper fit before cutting mahogany! Good luck!
    Attached Images          

  2. #2
    Join Date
    Jun 2020
    Location
    Irondequoit Bay, Lake Ontario
    Posts
    3
    In response to an inquiry, here are a series, the second 5, of 10 photos which show the dimensions of the block at the forward end of the coaming that attaches to the cabin. These images show the dimension of the starboard side on my boat. Make a prototype, first, from 2"x10" scrap to assure proper fit before cutting mahogany! Good luck!
    Attached Images          

  3. #3
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,584
    Great photos! Be very cool to have a shot of the completed coaming and block.

  4. #4
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    129
    Nice pictures. Very useful. I wish I had them before I wasted pile of mahogany using the trial and error method when I replaced my combings last year. In the end I ended up scarfing in a wedge to get it right.

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts