That's what I was thinking - have to take the spreaders into account visavis sheet angle.
That's what I was thinking - have to take the spreaders into account visavis sheet angle.
The 10 degree jib track rule of thumb is discussed in Arthur Knapp's old book 'Race Your Boat Right'. He gives the credit of it's origination to a sail designing friend who name I don't remember. But it doesn't sound too scientifically derived, it's a rule of thumb. He also talks about double sheeted jib rigging which is having a sheet attached to the jib or one of the jib sheet that pulls the clew downward as well as the regular sheet that pulls backwards (aft). I'd like to try this out one day.
Sail designs have really changed since many of these ideals were formed. Best to be skeptical and learn from experience and experiment.
Ben
I have been reading this thread with interest especially since I have been sailing my Ariel for only 6 months and experimenting with different trim settings for the headsails. I have the original SS 30inch genoa track but the PO apparently removed the original jib tracks by the cabin sides. I have a CDI roller furler and have 2 headsails; 150% and 135%. CDI claims that I should be able to furl down to 70% of the original LP and still maintain a decent shape to the headsail although they recommend padded luffs which my sails do not have. In my case, I should be able to get the sails down to approximately 95-100% size. However, if the genoa blocks are not moved forward, I run the risk of the furler jumping up off the bearing and having a big mess to deal with. I wonder therefore, what modifications I should make to the genoa track configuration to make sure that once I furl down I can modify the trim to satisfy the smaller sail size. Can I manage a 100% headsail size with a longer genoa track or will I need to switch over an inner track by the cabin sides as originally set up for the smaller jibs? I feel it would be difficult to furl in and then have to switch the sheets to the inboard side of the shrouds but I am not sure what else would work.
I appreciate your thoughts.
Marcelo