Good luck. Looks like you have lots of projects ahead. They will all be worth it. The Commander is a great boat.
Good luck. Looks like you have lots of projects ahead. They will all be worth it. The Commander is a great boat.
What tool do I use to cut the top layer of deck off so I can replace rotted core?
How do I make the cut so I don’t cut the core below, but just the fiberglass skin?
Need some advice on how to cut into the deck to repair the core
I use a Dremel saw with the blade sit to 1/4" deep. Be careful not to cut too close to the toe rail. The outer skin and inner skin join there. I've attached a photo so you can see what I mean. Here is a link to a dropbox with a bunch of pictures of my deck recore project.
https://www.dropbox.com/sh/88ftelcej...rmwx9RYba?dl=0
Thanks Phil. I’ve spent time looking at your restoration to try to absorb some of your expertise. Inspiring work by you and a bunch of others on here
I modernized some of my hardware. A single Spinlock XAS and Lewmar 7 on each side. The Spinlock were from my local marine consignment store and the Lewmars were from eBay. The original halyard setup on the Commander had terrible angles.
Last edited by Madman; 03-19-2019 at 09:22 PM.
From precision
Finally got started on this project