Results 1 to 5 of 5

Thread: Cabin Heater

Threaded View

  1. #2
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621

    heater

    Ben,
    Two Cents. No experience, but I've been looking for years.

    Guess, the only place to mount it would be on the main
    bulkhead. Running the stovepipe out might be a problem
    with lines aft. Have to have easy removal of downdraft cap
    and temporary waterproof cap.

    Would choose the 66M, because the cabin space doesn't
    need thousands of BTU. Don't know if the 66M will take a
    tea kettle to heat water. Which is a fair heater too.

    Kerosene is OK if you use the 'odorless' stuff. I like the idea
    of those 16oz propane bombs, for a leakproof install. Both
    fuels create moisture. (Bottles are not recyclable but are
    refillable from a 20lb tank.) Spare kerosene storage and
    decanting is a problem. Kerosene creates soot.
    But it's also considered non-explosive.

    As for BTUs, I think: just change the cabin enough to be
    comfortable, rather than create a sauna. IF you are going
    to do a little cooking with a galley stove, that and a kettle
    of hot water would considerably cut back on chill. But also
    make steam and wet air! Propane can go Boom.

    !@#$%^! Hamilton cat never publishes any dimensions!!

    Any open flame in the accommodation will require a gas
    detector/alarm and positive air circulation pump in the bilge.
    Circulation is key to comfort, keeping mold to a minimum.

    Just thoughts...
    Last edited by ebb; 03-28-2018 at 09:35 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts