+ Reply to Thread
Results 1 to 15 of 107

Thread: C-025 Bisquit

Hybrid View

  1. #1
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    Can Holders

    These are really handy and pretty easy to make. A nice addition to any Commander or Ariel. They just pop on the combings and you can move them wherever you like - inboard or outboard. All you do is run a piece of 8/4 mahogany stock through a table saw with a dado blade set a little wider than your combings. (it might take a couple of passes) Cut the top piece with a hole saw and a scroll saw and the bottom piece with a table saw. Clean up the edges with a router, glue the three pieces together with epoxy, a few coats of varnish and voila - can holders that look like they are original equipment. A made one large enough to hold a wine bottle and also a removable cockpit table.

    Name:  2017-09-22 11.26.02.jpg
Views: 2046
Size:  73.0 KB

    Name:  2017-09-22 11.26.54.jpg
Views: 2076
Size:  39.3 KB

    Name:  2017-09-22 11.26.36.jpg
Views: 2055
Size:  89.6 KB

    Name:  2017-09-22 11.29.39.jpg
Views: 2125
Size:  97.2 KB
    Last edited by Bisquit; 10-10-2017 at 01:06 PM.

  2. #2
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    Hatch Board Storage

    Here is one idea that solved several practical issues on my Commander: stairs to the interior; a seat for my new nav station; and storage for my hatch boards. I came up with a fairly simple plan that solves all of these issues. I made a box with a removable top to store my hatch boards. The box slides into guides screwed into the front face of the setees and doubles as the top step and a seat for me when I am at the nav station. The lower step drops into wooden brackets screwed into the setees and is easily removable. The box and lower step slide out so I can access the engine compartment. It works great and was pretty easy to make.

    Name:  2017-09-28 11.18.18.jpg
Views: 1879
Size:  84.6 KB
    The box and step in place with hatch boards stowed

    Name:  2017-09-28 11.18.38.jpg
Views: 2024
Size:  79.4 KB
    Hatch boards stowed

    Name:  2017-09-28 11.22.11.jpg
Views: 1966
Size:  87.4 KB
    The box removed for access to engine compartment behind stairs. Note storage for cup holders built into the nav station.

  3. #3
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    End of the Season

    Headed back to the yard up the Calumet River.

    Name:  2017-10-12 15.57.59.jpg
Views: 1961
Size:  115.7 KB

    Name:  2017-10-12 18.23.34.jpg
Views: 1951
Size:  119.4 KB

  4. #4
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    My commander has a wine cellar!

    Name:  2018-02-16 16.07.42.jpg
Views: 1790
Size:  50.2 KB

    I've been adding a few improvements to Gail Grace this winter. I removed the original sink when I added the cooler and the nav station last year. This winter I reinstalled the sink and some storage with a removable cutting board forward of the starboard bulkhead. Just for laughs I installed a wine/booze bottle storage area in some dead space port aft. I can access it from the cockpit and the port quarter berth.

    Name:  2018-02-16 16.08.30.jpg
Views: 1915
Size:  63.9 KB

    Name:  2018-02-16 16.08.40.jpg
Views: 1897
Size:  86.2 KB

    Name:  2018-02-16 16.08.13.jpg
Views: 1826
Size:  70.0 KB

  5. #5
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    More fun on Lake Michigan

    Name:  IMG_4944.jpg
Views: 1660
Size:  85.4 KB

    Name:  IMG_4959.jpg
Views: 1683
Size:  118.4 KB

    Name:  KDDF3283.jpg
Views: 2003
Size:  158.1 KB

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts