+ Reply to Thread
Page 7 of 8 FirstFirst 1 2 3 4 5 6 7 8 LastLast
Results 91 to 105 of 107

Thread: C-025 Bisquit

  1. #91
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    613
    I'm aware I'm repeating myself, but you do terrific work and you saved a wreck of a boat and brought her back to life. Warms my heart!
    Those winch stands are epic. I missed the May posting of your nav station - which like everything else is top shelf.
    Cheers to you and Grace - GG is quite a gal.

  2. #92
    Join Date
    Oct 2016
    Location
    New York Long Island
    Posts
    72
    Your boat is so beautiful!

    Thank you so much for the hardware.

    For my next task, what is more important to put on: Boom Vang or a Cunningham?

    Which will make handling the boat easier?

    Thanks
    joe

  3. #93
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133
    No worries. I'm glad I could find a home for the piece. A vang will probably give you more ability to shape your sail in more conditions.

  4. #94
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    Fourth of July 2017

    Gail of Gail Grace Fame

    Name:  2017-07-04 14.20.04.jpg
Views: 1560
Size:  90.1 KB

  5. #95
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    Can Holders

    These are really handy and pretty easy to make. A nice addition to any Commander or Ariel. They just pop on the combings and you can move them wherever you like - inboard or outboard. All you do is run a piece of 8/4 mahogany stock through a table saw with a dado blade set a little wider than your combings. (it might take a couple of passes) Cut the top piece with a hole saw and a scroll saw and the bottom piece with a table saw. Clean up the edges with a router, glue the three pieces together with epoxy, a few coats of varnish and voila - can holders that look like they are original equipment. A made one large enough to hold a wine bottle and also a removable cockpit table.

    Name:  2017-09-22 11.26.02.jpg
Views: 1524
Size:  73.0 KB

    Name:  2017-09-22 11.26.54.jpg
Views: 1515
Size:  39.3 KB

    Name:  2017-09-22 11.26.36.jpg
Views: 1518
Size:  89.6 KB

    Name:  2017-09-22 11.29.39.jpg
Views: 1573
Size:  97.2 KB
    Last edited by Bisquit; 10-10-2017 at 01:06 PM.

  6. #96
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    Hatch Board Storage

    Here is one idea that solved several practical issues on my Commander: stairs to the interior; a seat for my new nav station; and storage for my hatch boards. I came up with a fairly simple plan that solves all of these issues. I made a box with a removable top to store my hatch boards. The box slides into guides screwed into the front face of the setees and doubles as the top step and a seat for me when I am at the nav station. The lower step drops into wooden brackets screwed into the setees and is easily removable. The box and lower step slide out so I can access the engine compartment. It works great and was pretty easy to make.

    Name:  2017-09-28 11.18.18.jpg
Views: 1323
Size:  84.6 KB
    The box and step in place with hatch boards stowed

    Name:  2017-09-28 11.18.38.jpg
Views: 1471
Size:  79.4 KB
    Hatch boards stowed

    Name:  2017-09-28 11.22.11.jpg
Views: 1434
Size:  87.4 KB
    The box removed for access to engine compartment behind stairs. Note storage for cup holders built into the nav station.

  7. #97
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    End of the Season

    Headed back to the yard up the Calumet River.

    Name:  2017-10-12 15.57.59.jpg
Views: 1400
Size:  115.7 KB

    Name:  2017-10-12 18.23.34.jpg
Views: 1395
Size:  119.4 KB

  8. #98
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    My commander has a wine cellar!

    Name:  2018-02-16 16.07.42.jpg
Views: 1250
Size:  50.2 KB

    I've been adding a few improvements to Gail Grace this winter. I removed the original sink when I added the cooler and the nav station last year. This winter I reinstalled the sink and some storage with a removable cutting board forward of the starboard bulkhead. Just for laughs I installed a wine/booze bottle storage area in some dead space port aft. I can access it from the cockpit and the port quarter berth.

    Name:  2018-02-16 16.08.30.jpg
Views: 1374
Size:  63.9 KB

    Name:  2018-02-16 16.08.40.jpg
Views: 1334
Size:  86.2 KB

    Name:  2018-02-16 16.08.13.jpg
Views: 1305
Size:  70.0 KB

  9. #99
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    More fun on Lake Michigan

    Name:  IMG_4944.jpg
Views: 1113
Size:  85.4 KB

    Name:  IMG_4959.jpg
Views: 1104
Size:  118.4 KB

    Name:  KDDF3283.jpg
Views: 1429
Size:  158.1 KB

  10. #100
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    Last Sail of the Season

    In good company at the dock awaiting haul out

    Name:  gg&morri.jpg
Views: 1073
Size:  136.8 KB

    Nice sail to the yard

    Name:  IMG_79430011.jpg
Views: 1161
Size:  74.5 KB
    (don't know why the image is rotated)

  11. #101
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133

    Another Season in the Books

    Name:  20190930_183816.jpg
Views: 885
Size:  212.8 KB

    Name:  20190930_183947.jpg
Views: 883
Size:  218.1 KB

    Name:  20190930_190757.jpg
Views: 871
Size:  172.6 KB

  12. #102
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    133
    Course Correction
    I decided to make a new rudder. The old rudder was perfectly fine however, the aperture was too small for the feathering prop I wanted to install. Also, I felt too much correction with the rudder was necessary in moderate to heavy air. I hate to mess with the original Alberg design. It is elegant and compliments the lines of the boat perfectly. However, I suspect my boat may have been delivered with a taller than standard rig. (Perhaps it was a Great Lakes – light air modification.) My P measurement is 1′ longer than than standard. Seat of the pants engineering led me to decide I needed to add 15% additional surface area on the trailing edge to help with the increased main sail area.

    Initially I planned to open up the aperture and scarf some wood to the trailing edge but this stared to look too hacked together.



    Abandoned Modification
    Back to the drawing board. remove the original bronze shafts and build a new rudder. Luckily I happened across a 6/4 x 24″ mahogany board that would allow a one piece replacement. It is a testament to the quality of the bronze that Pearson used that, after almost 60 years, when I removed the nut access windows, the bronze tie rods unscrewed like they were assembles yesterday. Once removed, I used an induction heater to heat up the upper shaft and bend it back 30 degrees to allow for the larger aperture.

    Next step is to make a template for the new rudder. I installed the new prop then made a Masonite blank and experimented with shapes that cleared the new prop, had the additional surface area, and looked like they belonged to this classic design.

    https://bisquitreborn.files.wordpres...419-copy-1.jpg

    Once I decided on a shape I cut the plank to the new shape, ran the leading edge through a router with a 1″ rounding bit to accept the upper and lower shafts, drilled holes for the tie rods, then using a 1 1/2″ hole saw made windows for the new nuts.

    https://bisquitreborn.files.wordpres...412_181048.jpg

    New rudder faired with nut windows filled.
    Next step is to install, coat with epoxy barrier coat and bottom paint.

    https://bisquitreborn.files.wordpres...4-1-copy-1.jpg

    On the boat

    https://bisquitreborn.files.wordpres...151-copy-1.jpg


    Barrier Coated with IP 2000 E

    https://bisquitreborn.files.wordpres...419_142029.jpg

    Bottom Painted and ready to go

  13. #103
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    613
    If your old rudder is perfectly fine, as you mentioned, would you be interested in selling it to me?? Lucky Dawg is in need!
    Kyle

  14. #104
    Join Date
    Jul 2004
    Location
    Winyah Bay, SC
    Posts
    605
    Very nice work, it does indeed look as if it could be OEM Alberg/Pearson.
    Kurt - Ariel #422 Katie Marie
    --------------------------------------------------
    sailFar.net
    Small boats, long distances...

  15. #105
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621
    New rudder a gorgeous rendition. Totally impressed with your metal skills.
    Did not miss your marvelous cast gudgeon. Love your moody photos too.
    Here's to a 'Quiet reach' with your new rudder's tiller under your arm...

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts