Thanks. You have set the bar really high.
Thanks. You have set the bar really high.
I decided to prep the hullsides as well as the deck before I started to prime her. The old paint came off easily with a razor blade. I filled and faired all of the miscellaneous scratches and gouges. The shape is good.
Ready for primer
One coat of primer on the deck
Two coats of IP2000E on the deck and hull. This weekend I will add 3 more coats of primer then sand and prep for the Awl Grip system.
Cast Aluminium Fittings
Bisquit had all of the original (Danish I think) cast aluminium fittings on the deck. It would have been cheaper to just replace them in stainless but I want to maintain as much of the original hardware as I can. I sent the bronze stuff (stemhead, chainplates, tiller head, lifeline deck plates etc... ) out to be re-plated. I'm still waiting for those. After spending a few hours with mixed results trying to polish the aluminium fittings myself I found a shop outside of Chicago that specializes in metal polishing. I got the fittings back the other day. They are beautiful. Now I have to protect them. I don't want to clearcoat them. That would create a maintenance nightmare and it would wear off the cleats almost immediately. I'm talking to a guy about Bright Anodizing. I'm hoping he can help. Does anyone have any experience with this process?
Also, There is a 3" deck plate not pictured but restored. It looks like a Dorade vent may screw into it. Is anyone familiar with this fitting?