-
Kiwi Grip:
I used a custom color, but I could have easily used their standard...I think I ended up about the same place. I did find it quite easy to color by the local Sherwin Williams store (not home depot!). The guy spent 10 minutes punching his calculator, then blended it up purposefully.
I bought white for a reason: painting my headliner inside the boat. I did my best to put a decent surface on the factory roughness...made worse by fiddling through the last 40 years...then rolled on a couple of coats of white Kiwi Grip using a foam roller. The idea was to make the surface uniformly rough so that the whoppies weren't as obvious. This is a subjective opinion, but I'd say it worked rather well. Looks better than the factory original white-grey-black fleck budget housepaint, certainly.
-
Very nice
Really nice job there. Good idea using the Kiwi in the cuddy, the gloss paint I used is pretty good at highlighting every ripple. You guys sailing in Cleveland yet?
Mike
C227
-
Yes, Mike...sailing season started very early this year, and it has been great because the spring heat has not arrived yet...and the customary violence of the daily T-storms hasn't b een in evidence. It will come! But, "Full and By" is still in my shop, receiving her wood trim and wiring....
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules