+ Reply to Thread
Page 4 of 4 FirstFirst 1 2 3 4
Results 46 to 54 of 54

Thread: Commander #38

  1. #46
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,518
    Curmudeonery thinks it may be the angle of the pic BUT
    Commanders have no curve to their sheer.

    Photos invaribly show a georgeous curve.
    But it is Alberg's perfectly shaped hull and symmetry of deck that causes the illusion.
    Nobody else can do it.
    It's extraordinary.
    Never seen another straight sheer look anywhere near as alive and sexy.

    For contrast and confirmation there is a photoshop (oval ports) on a live Commander by Frenna,
    post#164 (last page) on the Daysailor Craze thread.
    Last edited by ebb; 03-15-2012 at 08:24 AM.

  2. #47
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,518

    Unhappy Selling?

    Sorry to see Suzie Q go!
    Marriages and Morgages can't be denied.
    It was great to be here and see her sail
    and be part of the energy Your Commander
    benefited so much from.

    Bet you'll be looking for her again in a few years
    when there could be a new little sailor or two who
    need to go sailing in such a priceless boat.

  3. #48
    Join Date
    Aug 2010
    Location
    Long Island, NY
    Posts
    64

    I'm Back!

    Well, 4 years went fast... Never did end up selling, how could I...

    A lot has happened, but i'm finally ready to get her back in the water. Will be starting a recore of the foredeck, side decks, and parts of the cabin top immediately.

    The Plan
    - Recore (areas specified above)
    - Repaint decks
    - Re bed all deck hardware
    - new bottom paint
    - finish brightwork
    - and other misc. projects

    The Goal
    - Having her in the water at some point next season. (More of a reach goal, but i think possible...)

    Progress So Far:
    - Removed all the hardware and brightwork from the decks.

    Next Step
    - Remove top skin of deck from recore areas and scrape out rotten core.

    ------------------

    Will be posting progress and asking questions of you talented folks regularly.

    First question - the foredeck's bottom skin has a tear (see photo) where it looks like one of the previous owners had repaired the deck from the bottom. I'm guessing the tear was due to pressure on the deck from above, and a not so great adhesion of whatever materials used for the repair. My question is, do I repair this first, before removing the top skin? or, would it make more sense to repair from above after I carefully remove the core from the area?
    Attached Images        
    Last edited by C38; 09-19-2015 at 05:46 PM.

  4. #49
    Join Date
    Apr 2015
    Location
    Chicago, IL
    Posts
    106
    What a pretty boat. Great shots

  5. #50
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,518

    sanding? arrrgh!

    Mike, Screwed up my mast rehab, have to remove moisture cure urethane and failed WR-LPU.

    Can't deal with grinding stuff off anymore. Just stumbled onto this stuff.

    Just ordered this stripper from Rockler Woodworking & Hardware, 1-800-279-4441

    Soy-Gel TM Paint and Urethane Remover
    non-toxic , low VOC, work without gloves, without particle mask, bio-degradable,
    get it on yer hands no burn. Best use for soy beans I've ever seen!
    Wouldn't it be great if this is as fantastic as it sounds.

    Maybe you can get it to work overhead in the boat -- hold it on with seranwrap..


    Looks like the best stripper ever!
    Must be fairly new. Home internet site useless.
    There's a few YouTubes, gotta check it out!

    They have another, haven't researched it but there is an extensive YouTube
    showing bottom paint being removed from a 27footer, called Soy Stripper,
    Must be the same maker.

    Good luck!
    Last edited by ebb; 09-21-2015 at 09:49 AM.

  6. #51
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,425
    Ebb, your soy stripper sounded familiar and something I thought Capt. Kurt of Ariel #422 used. I didn't find that, but instead he use a "citrus stripper" and gave his usual thorough pictorial how-to and review of the product starting at post #215 of his gallery thread: http://www.pearsonariel.org/discussi...8963#post18963
    PS. It still seems like he used the soy product - perhaps on his bottom? (Boat, that is... )
    PSS. Welcome back Michael!
    Last edited by mbd; 09-21-2015 at 10:01 AM.
    Mike
    Totoro (Sea Sprite 23 #626)

  7. #52
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,518

    strippers

    Soy-Gel
    is not Citrus. The citrus requires a moonsuit and usual protective paraphernalia.

    Soy-gel you can work in your bathing suit. NON - TOXIC. I wouldn't eat it, though!


    Just thinking, can't imagine grinding the paint off on the underside of the forepeak,
    but, if you can reach in there with a very wet roller and lay on an 1/8" coat...
    a 4" bristle brush might be easier...
    then slap on some seranwrap (slows evaporation and creates surface tension)
    Come back later (accounts vary and have to take into account the age of the paint),
    and pull the plastic into a pail. And then I imagine, paper towels could be used to
    grab & scoop the gel. Then a sponge/scotchbrite pad to clean the surface with water.
    Well, of course, I can see using a Tyvek suit with a hood to keep yer hair parted...

    Viewing video: the Soy-Gel, after it has done its magic, seems to reduce the paint to
    gel, or a very similar material. making it simple to scoop/wipe the wet stuff away. imco

    That seems fairly easy, and if the stuff works as seen, a safe and sane way to remove
    paint. I'm sure there's a learning curve... as you see on the amazon comments for this
    product, there are a few cretans who don't get it. But there are others who recogonize
    what a godsend this stripper really is! ...If it is as they say. I'm a week out.
    Nobody local carries this stuff.
    Last edited by ebb; 09-21-2015 at 10:54 AM.

  8. #53
    Join Date
    Aug 2010
    Location
    Long Island, NY
    Posts
    64
    Ebb, thanks for the tip, it certainly sounds better than grinding paint and fiberglass for hours on end.

    I will be sure to post results if I use it!
    Mike E

  9. #54
    Join Date
    Oct 2016
    Location
    New York Long Island
    Posts
    72
    Other commander 38. Can not post in my account. Trying another one.
    Asking what do I finish marine plywood with to be part of the hatch on my 38

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts