+ Reply to Thread
Results 1 to 15 of 68

Thread: Ariel 322 (at last)

Hybrid View

  1. #1
    Join Date
    Mar 2009
    Location
    Southern New Hampshire
    Posts
    42

  2. #2
    Join Date
    Mar 2009
    Location
    Southern New Hampshire
    Posts
    42

  3. #3
    Join Date
    Mar 2009
    Location
    Southern New Hampshire
    Posts
    42

  4. #4
    Join Date
    Mar 2009
    Location
    Southern New Hampshire
    Posts
    42

  5. #5
    Join Date
    Mar 2009
    Location
    Southern New Hampshire
    Posts
    42
    And now for the not so pretty. First up, busted stantion and core rot. Not looking forward to fixing this I need to take a pic from the top side, but needless to say, its bad.

  6. #6
    Join Date
    Mar 2009
    Location
    Southern New Hampshire
    Posts
    42
    next is a small hole in the hull right above the cockpit drain, It does not go all the way through the hull, just into the drain channel, but all the same, I want to take care of it.

  7. #7
    Join Date
    Mar 2009
    Location
    Southern New Hampshire
    Posts
    42
    This looks like a nightmare to me.... The engine supposedly does not run, and the last owner was using an outboard on a bracket hanging off the stern, but this is another issue I would like to remedy soon.

  8. #8
    Join Date
    Aug 2008
    Location
    grand rapids mi
    Posts
    91
    Quote Originally Posted by Fox View Post
    next is a small hole in the hull right above the cockpit drain, It does not go all the way through the hull, just into the drain channel, but all the same, I want to take care of it.

    Not sure what you mean there, do some Ariels have the tubes glassed along the side of the hull?
    Mine are just glass tubes on the bottom connected with hoses to the cockpit.

    Ken.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts