Well the weather has redirected me a bit...
away for a short time from the toe rail project and towards finishing up the all mahogany tiller. Yesterday we had another 70 plus degree day so I cut out of work a little early so I could take advantage of the warm air to glue up my all mahogany tiller. Then today the temperature after work was below 60 degrees so I did not want to chance the putty not setting up so instead I finished making the tiller.
All went well until I was using a router bit to put a radius in the edges of the tiller and I had a blow out. See the first picture below.
But if you were to hold the tiller in your hands and look at it you would never know it was there unless I showed you what to look for. The second tiller shows the salvaged tiller and the original one I made.
JERRY CARPENTER - C147
A man can succeed at almost anything for which he has unlimited enthusiam.