Spent the day working on Destiny today...
And the pictures below show why you don't use polyester resins to tab in a bulkhead. The first picture is what somebody did for the previous owner when he replaced the bulkheads. It was coming loose and when I pryed on it a little it just popped loose which you can see in the second picture. I had to cut it loose from the bulk head so I can redo the tabbing.
My current project is repairing and reinforcing the bottom side of the deck where I will later be recoreing from the top. After patching all of the holes I will be putting a layer of 1708 biax and a layer of 6oz finishing cloth on the bottom of the deck to give it more strength before I cut into the top. And once I had talked myself into going to all that work I decided I would fill the toe rail so I could tie the hull and deck together and make a better looking job of the reinforcing. The third picture is a drawing of what I'm doing at the toe rail.
JERRY CARPENTER - C147
A man can succeed at almost anything for which he has unlimited enthusiam.