The first picture below is the surprise I found when I removed the stem head fitting. This boat had more leaks than a colander.
The second picture is a trapazoid I made out of 3/8" thick fiberglass panel that I glued in place with some epoxy last night. Tonight I cut some biaxial mat and glassed it in place (3rd. picture). The biax will not only hold the plug in place but it also locks the deck and the hull together better than it has ever been in that area. Tomorrow night I will cover the existing hole in the front of the bow with some mylar and tape and then drill a hole in the top of the deck where the stem head fitting will later cover it up. Then I will mix up some epoxy with micro fibers to strengthen it and pour it into the the area closed off by the plug I installed.