+ Reply to Thread
Results 1 to 15 of 422

Thread: Commander 147

Hybrid View

  1. #1
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720

    Traveller install complete

    Did you know that according to Wikipedia the correct spelling for a boats traveller requires 2 L's? All these years I have been spelling it incorrectly.


    So anyway I got a small amount of time I could spend on Destiny today and I finished the traveller installation.
    Attached Images  
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  2. #2
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    614
    What's the launch date, Man? Can't wait to see Destiny fulfill her destiny!

  3. #3
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720

    launch date is

    Quote Originally Posted by Lucky Dawg View Post
    What's the launch date, Man? Can't wait to see Destiny fulfill her destiny!
    ASAP. In the beginning and for most of the time I have been working on her I have answered that question with "when she is done". Then a few months back I started saying I wanted to launch in Nov. but a combination of things kept me from working on her which included a couple of 4 day stays in the hospital with diverticulitis. So now I just work on her when ever I can and try my best to get her back in the water. As you will see as I post them I still have some significant projects to complete. So....... ASAP! But in my mind I sail her every time I work on her.
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  4. #4
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720

    Mast raising

    Stepped the mast this weekend so we could adjust the old shrouds, mark them and then use them for the pin to pin dimensions to make the new ones. I already have the new material here with swaged fittings for the top and mechanical fittings for the bottom and all of the shrouds were left long so once I got to this stage I could measure and make them up. So for the standing rigging it is finally show time!


    You will notice the boom is installed close to the bottom of the mast. I designed the vang attachments to the same size as the gooseneck so that when I was lifting the mast I could put the boom closer to the bottom of the mast to make the baby stays work correctly.


    Oh and a special thanks to my good friend Tom Scott who drove just over 2 hours each way to spend the day and help me with this process! Friends like that are hard to come by but I am lucky enough to have two of them. My other friend Tim who lives in Iowa but visits Florida frequently comes her to help also.
    Attached Images    
    Last edited by Commander 147; 01-05-2015 at 12:11 PM. Reason: additional thanks
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  5. #5
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621

    Exclamation mast up!

    You guys make it look S O O O easy!

  6. #6
    Join Date
    Sep 2008
    Location
    Brooksville, FL
    Posts
    720

    The hardest part was.....

    Quote Originally Posted by ebb View Post
    You guys make it look S O O O easy!


    Making up the bridles and baby stays to keep everything in alignment while it was coming up. That and getting the mast on the boat. We pulled the boat out of the shelter, hoisted the mast up to the peak of the shelter with the mainsheet and vang hardware and then backed the boat under the mast and lowered it onto the boat.
    Attached Images  
    JERRY CARPENTER - C147
    A man can succeed at almost anything for which he has unlimited enthusiam.

  7. #7
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    614
    Hey Jerry,
    I was in your neck of the woods for spring break! Fantastic break from Michigan winter. We were staying with friends in Bradenton / Anna Maria. Stink-boated out to Passage Key - looked like like we'd made a quick trip to the Bahamas!

    Also paddled down the Peace River in Arcadia. My son and I found a bunch of fossil shark teeth / etc including a half a megaloadon tooth! (16 million year old Great White predecessor)

    I'd could move down that way in a heartbeat!
    KW

    Name:  passagekey.jpg
Views: 1102
Size:  87.4 KB

    Name:  fossils.jpg
Views: 1017
Size:  153.1 KB

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts