Well, I have been gone from here for a long time
And some of you probably think I have given up on my commander restoration project. That is not the case, I just have not taken the time to post about her progress.
So after I finished the recore in the cockpit floor I had to fair that area out. And while I was working on that I went over the entire boat fairing everything that needed it in preparation for the primer.
When I was convinced I had it all I started priming the hull and deck with Awlgrip 545. That's when I found out I did not have it all. I found a lot of small issues when I primed her that I fixed as I worked on the primer.
The first couple picture below is after the primer went on.
On the hull I was able to only primer her once and sand it smooth. The deck was another story. I had to prime her sand her and prime her again and sand yet another time.
The last three pictures are of her being painted. I found a guy in Tarpon Springs to spray her with Awlcraft.
JERRY CARPENTER - C147
A man can succeed at almost anything for which he has unlimited enthusiam.