Ebb

The first batch of epoxy I mixed was used to wet out the finishing cloth and then I used a 1/2" brush to wet out the area I was packing epoxy into just before I added the cabosil to the rest and started packing it in. And I did keep pushing the thickened epoxy in until the stuff came back out at me all the way around. I'm confident I got the area completely filled. I also considered mixing in some microfibers in the thickened epoxy but I did not have enough here to do the entire job and my thought was that the packing was not doing anything structural where I was putting it. It was just filling a gap so I proceeded without it.

I do appreciate your input. Someone needs to keep me straight...Lord knows I can wander on my own. :-)