Quote Originally Posted by carbonsoup View Post
One particular modification that you have made, internal halyard masthead blocks, is one i am definitely interested. Once I get some headspace for this modification I will be in touch, most probably in April/may when I attack the mast and spars. One question that I did have; it would seem likely that the halyard could get caught over the top or to the side of the block, during squally weather which would most surely cut the halyard in quick order. Had you considered a SS 'chock' welded on and bridging the entryway for the halyard? I admit this could add leverage of a twisted halyard to bend the entire assembly causing more serious problems...
I don't think it is possible for the halyard to get hung up on the edge of the sheeve (where there is only approx. 1/16" of clearance on each side) or on the top because it is rounded and sloping down so I can't really see a need to do what you are suggesting (if I understand correctly). Of course only time will tell for sure when she is getting used.