Mike, no I'm not.. Just put the winter wrap on the O'Day last weekend and parked her in the newly designated winter spot.

Ebb, the mahogany is cut into the same dimensions as the pink styro mock-ups that have the bronze chocks set in them in the earlier posts a few pages back. The pieces are just over one inch thick by something in the range of 2 to 2 1/2 inches tall (I forget the exact size) and a little over 14 feet long. So that is the wrinkle. I'd have to flop them on their side and THEN bend them to fit the curve of the sheer if I wanted to use them as a cap. I do have an uncut plank of the same stock left that is around 9 to 10 inches wide by 14 plus feet that may work for the extreme curves up front, but, I don't think there is enough to do both the starboard and port sides. Looks like I may have jumped the gun again...