Fruits Of My Labor (A-113)

[Tony G]

There are some things that aren't worth the effort to build if you can find something that is close to what you need. This work bench is a 24" x 48" shelving unit split in half (height wise) and mounted side-by-side. I added a 3/4" thick work top and the 48" x 96" peg board to the back. In hindsight I wish I had spent the extra $12 and bougt 1/4" peg board as the hooks are continuously falling out whenever I grab a tool. I've tried bending them to hold tighter, but, little improvment. Crud.

I added a 2 x 2 in one corner to hold speed clamps and another to the other end of the top to hold the pipe clamps.