Fruits Of My Labor (A-113)

[Tony G]

The water tank bulkheads drop into 'grooves' formed by triangular cleats. Of course all of the edges get sealed with two coats before assembly. And there will be plenty of thickened epoxy fillets for the bonding here for the strength. I've been reading and re-reading everything I can find on building water tanks. Turns out it's the same as building plywood aquariums I can do that! I have done that!

I'm really looking forward to getting the tank done.

The tank will only occupy the bottom( duh-me..)two thirds of this area. The top area will have the inspection port, the filler tube, a vent, the pick up tube and the fan and ducting for the composter.