+ Reply to Thread
Results 1 to 15 of 619

Thread: Fruits Of My Labor (A-113)

Hybrid View

  1. #1
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311

    Inside Outhaul

    Quote Originally Posted by Tony G
    Now I'm trying to figure out how the heck I'm going to fit a 4:1 or 6:1 block system inside the boom for the outhaul.
    Any thoughts?
    The rigger who installed a four-to-one outhaul inside the boom on #76, built it in an aluminum tube and slid it into the boom. I believe the tube was split to give access for installing the blocks and line and was then folded closed as it went into the boom.

  2. #2
    Join Date
    Sep 2001
    Location
    Northern MN
    Posts
    1,100
    Bill,

    That's waaay better than what I was thinking. You guys on the coast(s) get all of the good stuff.

    I have a couple of questions about 76's set up. Do you find the 4:1 purchase is enough to comfortably/easily adjust the outhaul? Is the fixed block in the system attached to the inner tube mechanically or is there a line attached to it that exits the boom and is tied off somewhere to 'fix' the block's location. Or, is it attached in some manner that my wee-little, land locked mind hasn't even thought of yet? Did the tube add much weight to the boom?

    I realize some of these questions may require a trip to your boat to answere. And, of course, if at all possible take some pictures.

  3. #3
    Join Date
    Sep 2001
    Location
    Orinda, California
    Posts
    2,311
    These days, I find the 4 to 1 advantage to be marginal when sailing to wind. May be due to my "maturity," but it (and a future jib halyard) is the reason for the port side cabin top winch. It may also no longer be 4 to 1 as there were two owners between selling the boat in 1988 and repurchasing it in 1997.

    As for how it's done, sorry, but I don't have a clue. Had it installed by a local rigger who specialized in such things. I'm pretty sure the inner tube and hardware are mechanically fixed. As for weight, the tube material is pretty thin, so I don't think it's an issue.
    Last edited by Bill; 04-12-2005 at 08:20 AM.

  4. #4
    Join Date
    Sep 2001
    Location
    Northern MN
    Posts
    1,100

    Eyebrows, they're all the rage!

    After weeks of low temps and cruddy weather, I finally got to do a little something on the boat. Whadyuh think? I was unsure at first, but after I painted a port frame on I like it!

    I also added a buffet table to the aft end of the cockpit. Pictures will follow.
    Attached Images  

  5. #5
    Join Date
    Sep 2001
    Location
    Northern MN
    Posts
    1,100
    Here's the new cockpit table. Big enough for the whole family and plastic covered for the little tykes that spill alot.
    Attached Images  

  6. #6
    Join Date
    Sep 2001
    Location
    Northern MN
    Posts
    1,100

    The BIG score!

    Can you believe it? Someone was throwing this away! That should solve the 'head' problem. And the name...it says it all
    Attached Images  

  7. #7
    Join Date
    Sep 2001
    Location
    Northern MN
    Posts
    1,100
    Another four consecutive hours of work. Something big could happen here.
    Attached Images  

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts