-
Sorry. No pictures of the latest work. All I got done was to sheath the inside of the water tank and underside of the tank top. Then I started rolling on layers of straight epoxy to coat all of the surfaces. Even though I was trying to do my best I still ended up with a couple of 'sags' in the final coat.
I hope to make a fiberglass sheet tomorrow morning using the technique Ebb described above. I allready have the patterns for the baffles and that should allow me to get the pieces cut out and installed this weekend. Then I can let everything 'stew' for a couple of weeks before painting and then finally sealing the top on.
We picked up some more plywood this weekend and I am excited to get started decking the forward berth area. Then I will have a surface to work off of in order to sheath the anchor locker(s) so we can check those off the list.
My home has a keel.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules