+ Reply to Thread
Page 22 of 23 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 LastLast
Results 316 to 330 of 334

Thread: Commander #65 "Lucky Dawg"

  1. #316
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    So, while I have this thread high-jacked... A pic of the old girl from this summer. I think I'm going to pull the coamings off at haulout and refinish. I didn't use any InterStain on them when I finished them several years ago and they don't match the rest of the brightwork - and that color, I prefer. In a perfect world, New Found Metals would have made a portlight that matched the original cut-out, but the upgrade has been worth it for super-dry interior. Someday, she'll get new sails, but it isn't atop the priority list right now. Baggy as they are, the blow her along at hull speed just fine. She'll do...

    Name:  LuckyDawg2017.jpg
Views: 8072
Size:  69.6 KB

    (Edit: oops, it looks like I already posted that picture. Well, there she is again)
    Last edited by Lucky Dawg; 10-12-2017 at 07:05 PM.

  2. #317
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    and last, Lucas from this summer. L'il Dawg - who we purchased in late August - got wet for just a couple racing weekends. It was SO cool watching him handle his own boat and go out on the water with his buddies and enjoy some independence. Spring Lake Yacht Club is super active and a terrific teaching organization that has pumped out some collegiate sailors. A couple Opti pix:

    In the first pic, impromptu sail with friends - just goofing around in their own boats. Then pix of first and last races at the end of summer. (Sail numbers came with the boat - we'll install over the winter)

    Name:  1.jpg
Views: 7536
Size:  28.5 KBName:  2.jpg
Views: 7601
Size:  43.3 KBName:  3.jpg
Views: 7613
Size:  96.3 KBName:  4.jpg
Views: 7543
Size:  41.9 KBName:  5.jpg
Views: 7540
Size:  145.8 KB

  3. #318
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616

    Rudder problem

    Pretty sure this isn't good. I do know that the mahogany swells once in water, but I don't think this kind of play has been in the mix before. Thoughts??

    there is a 10 second video here: https://www.flickr.com/photos/124380...dateposted-ff/

    Name:  badrudder.jpg
Views: 7539
Size:  13.4 KB

  4. #319
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    New addition to the Williams' Livery. 1959 Lyman. Originally a runabout - per pic below. PO converted to a launch. Nice bones. Not sure what end result will be. The original midship helm is removed and she steers from the stern. May outfit with a 59'-ish era outboard. Seating is currently parallel to the rails. Might put perpendicular seating back in. TBD. Fun to play with.

    p.s. We named "her" Norman. We spend time every year on Squam Lake in N.H. where On Golden Pond was filmed. She looks like a Squam Lake boat. Squam => On Golden Pond => Norman Thayer => "Norman"

    Name:  underway.jpg
Views: 7476
Size:  81.5 KB

    Name:  originalLyman.jpg
Views: 7540
Size:  87.7 KB

    Name:  port.jpg
Views: 7494
Size:  149.5 KB

    Name:  stbd_quarter.jpg
Views: 7545
Size:  146.2 KB
    Last edited by Lucky Dawg; 07-31-2019 at 08:47 PM.

  5. #320
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    Quarentine Project! I'm chagrined by the state of my brightwork! Last varnished these bits in 2011, and it sure shows. I refinished the companionway just a couple years ago. Leaving that in place. I'm consoling myself with the knowledge that this mess will look like fine furniture in a couple weeks.

    Name:  bits.jpg
Views: 7289
Size:  70.2 KB

    Name:  shame.jpg
Views: 7259
Size:  63.5 KB

    Name:  nekkid.jpg
Views: 7357
Size:  66.7 KB

  6. #321
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    Kyle, s/v Lucky Dawg is lucky to have you for an owner.

    PS. Man, those Commander coamings are looooooooong!
    Mike
    Totoro (Sea Sprite 23 #626)

  7. #322
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    Hey Mike! Long time! Hope you and yours are staying healthy. Good to hear from you!

    I don't know how lucky she has felt. Stem to stern DIY home renovation over the past two years commanded a lot of my free time and that put some Lucky Dawg upkeep on the back burner. Quarantine is providing necessary refinishing time. I have all the little pieces and all but about 6 feet of those long coamings stripped already. Heat gun + lots of patience and podcasts. I'll update.

    Name:  stripper.jpg
Views: 7237
Size:  68.2 KB

  8. #323
    Join Date
    Jan 2004
    Location
    Scarborough, Maine
    Posts
    1,439
    We are all well, thanks. I've been thinking about taking the cover off mine and thought I'd check in on my old friends. I hope all is well with you and yours too! Stay safe.
    Mike
    Totoro (Sea Sprite 23 #626)

  9. #324
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    A bit of progress. Removed old varnish with heat gun and followed up to remove any residue with Jabsco stripper. Bleached with oxylic acid from Ace Hdwr. Sanded with 40/60/80. Last pic is Interlux InterStain - brown mahogany. Will follow that in a couple days with Interlux InterPrime Clear Sealer and then Epifanes Clear gloss varnish. Tedious work, but looking forward to outcome.

    Bleached. Left is sanded to 80. 40 grit to get some of the black streaks out.

    Name:  bright1.jpg
Views: 7204
Size:  64.3 KB

    Cool pic! In the bottom right corner, you can see the diagonal seam repair I made 10 years ago with epoxy thickened with mahagany sanding dust. Still holding up and still dark brown - didn't know if it would bleach out somehow.

    Name:  bright2.jpg
Views: 7233
Size:  54.0 KB

    All bleached and sanded

    Name:  bright3.jpg
Views: 7210
Size:  63.8 KB

    InterStain. 80grit recommended final pass so that the product has adequate tooth to hold on to. "Thick housepaint" consistency that is rubbed across the grain and as much rubbed off in that way as will lift for final appearance. Process of rubbing/removal is pretty quickly underway after application. If you let it flash/dry, it is really difficult to rub down adequately. I used the same process/staining on my companionway brightwork a couple years ago and it looks great.

    Name:  bright4.jpg
Views: 7259
Size:  58.4 KB

  10. #325
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    I needed to bow the 3/8" mahogany plank that goes beneath my traveler. The bow above the lazarette bulkhead is pretty minimal, but I didn't successfully bow it when I created it and the athwartship ends of the piece lifted up a bit off the deck.

    So, I successfully used this method - https://youtu.be/--iPQIwSEJM*- making a steam bag out of tarp material and duct tape coupled to a home/laundry steamer.

    Because of COVID, the storage shed at my boat yard is closed, so I couldn't get the exact radius off of the top of the bulkhead. By my guess-timation, the radius on the trim piece above our fireplace seemed about right.

    Name:  radius.jpg
Views: 7210
Size:  30.3 KB

    Made a box out of 3/8" plywood and 2x4 scrap to match that radius.

    Name:  form.jpg
Views: 7264
Size:  94.9 KB

    Steamed it for about an hour clamped to my form. Let it cool in place. It got plenty hot with the laundry steamer.

    Name:  bag.jpg
Views: 7278
Size:  63.4 KB

    Finished product!

    Name:  completedbend.jpg
Views: 7183
Size:  64.8 KB

    This is a good video on building an actual steam box https://www.youtube.com/watch?v=NMvc2tuVGcQ* Just didn't seem worth the trouble for potentially the only time I will find myself steam-bending wood.

  11. #326
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    Splashed a couple weeks ago. A couple pix of rehabbed brightwork, etc. New sail and tiller covers

    Name:  cockpitrevival.jpg
Views: 7195
Size:  93.7 KB

    Name:  newsailcover.jpg
Views: 7345
Size:  81.9 KB

    Name:  crew062220.jpg
Views: 7029
Size:  59.0 KB

    Name:  dogonthehard.jpg
Views: 7193
Size:  85.4 KB

  12. #327
    Join Date
    Sep 2001
    Location
    San Rafael, CA
    Posts
    3,621
    KYLE, Lucky Dawg, Your Commander is absolutely Magnificent !!

    And GLORY BE: your cockpit sole is an amazing treat to behold as well!

    Just Gorgeous.

  13. #328
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    Thanks Ebb! Labor of love. We were gone for two weeks in New Hampshire/Squam Lake and then Nantucket. Back now and we sailed yesterday in dead-steady NW 13kts. Old girl was flying and looking good in the process.

    Name:  072720sail.jpg
Views: 7028
Size:  50.9 KB
    Last edited by Lucky Dawg; 07-28-2020 at 08:50 AM.

  14. #329
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616

    Catch up!

    Been a while. We're still sailing. Crew is growing - kids growing up and added a dog.

    Name:  a912.jpg
Views: 6636
Size:  20.9 KBName:  b912.jpg
Views: 6646
Size:  17.4 KBName:  e912.jpg
Views: 6630
Size:  19.8 KB

  15. #330
    Join Date
    Apr 2007
    Location
    Grand Haven / Muskegon, Michigan
    Posts
    616
    Couple underway.

    Name:  aft912.jpg
Views: 6617
Size:  45.5 KB

    Name:  fore912.jpg
Views: 6649
Size:  38.2 KB

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts